ENGLISH

From Jim Marshall

I would like to personally thank you for selecting one of my new MG range of combos – the MG50DFX 1x12" or the stereo MG250DFX 2x12".

As a musician myself, I fully understand what it takes to perform live in a band situation. In addition to talent, dedication and a lot of hard work, you also need equipment that will help you deliver the goods in each and every playing situation you find yourself in. With this goal firmly in mind, I set my experienced R&D team the task of designing a new range of affordable MG amplifiers that will deliver the tone you’re looking for at all volume levels – from quiet late

night practice to a full-blown live gig and all points in-between – in the way only a Marshall can.

Utilising groundbreaking new technologies, some of which were developed for our critically acclaimed AVT range, the new MG Series raises the standard for what can be expected from a value-for-money range of guitar amplifiers and defines a new benchmark. For example, the power amp section of your new combo boasts FDD (Frequency Dependent Damping) – a radical new feature that is exclusive to Marshall Amplification and accurately mimics the way our all-valve amplifiers interact with a loudspeaker. As a direct result of FDD, your new MG50DFX/MG250DFX will give you a sound and feel never before thought possible in such an affordable, non-valve amp.

The DFX (Digital Effects) featured in both the MG50DFX and MG250DFX have been custom voiced by our in-house digital effects experts. Each one of the five effect types on offer (Chorus/Delay, Delay, Chorus, Flange and Reverb) have been designed to emulate the much sought after warmth and feel of analogue effects, but in a highly flexible digital format. Furthermore, a wide range of variations for each effect are quite literally at your fingertips – merely tweaking the three DFX controls (Preset/Adjust & FX Level controls for the Chorus/Delay, Delay, Chorus and Flange options; and a separate Level control for the Reverb) on the front panel, will give rise to sounds that range from subtle to radical, while always remaining both natural and musical.

Like all the amplifiers in the new MG range, state-of-the-art manufacturing and stringent quality control procedures ensure that these combos meet the high standard of build you have come to expect from all Marshall products. The MG50DFX and MG250DFX were completely designed and engineered at my Headquarters in Milton Keynes, England.

Whether the MG50DFX or MG250DFX is your first ever Marshall, or is the latest addition to your arsenal of amps, the tone, flexibility and feel of these compact, rugged combos is guaranteed to deliver the goods – from bedroom to backstage to onstage!

I wish you every success with your new Marshall. Welcome to the family...

Yours Sincerely,

!WARNING! - Important safety instructions

WARNING: This apparatus must be earthed!

A.PLEASE read this instruction manual carefully before switching on.

B.ALWAYS use the supplied mains lead, if a replacement is required please contact your authorised Marshall Dealer.

C.NEVER attempt to by-pass the fuses or fit ones of the incorrect value.

D.DO NOT attempt to remove the amplifier chassis, there are no user serviceable parts.

E.Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been damaged in any way, such as when the power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally or has been dropped.

F.NEVER use an amplifier in damp or wet conditions. No objects filled with liquids should be placed on the apparatus.

G.ALWAYS unplug this apparatus during lightning storms or if unused for long periods of time.

H.PROTECT the power cord from being walked on or pinched particularly at plugs, convenience receptacles and at the point where they exit from the apparatus.

I.DO NOT switch the amplifier on without the loudspeaker(s) connected.

➲Note: This equipment has been tested and found to comply with the requirements of the EMC directive (Environments E1, E2 and E3 EN 55103-1/2) and the Low Voltage directive in the E.U.

➲EUROPE ONLY - Note: The Peak Inrush current for the MG50DFX is 9.6 amps. The Peak Inrush current for the MG250DFX is 19.8 amps.

➲CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance may void the users authority to operate the equipment.

➲Note: It is recommended that all audio cables, with the exception of the speaker lead, used to connect to the MG50DFX and MG250DFX are of a high quality screened type. These should not exceed 10 metres in length.

Always use a non-screened Marshall approved speaker lead when connecting an extension cabinet to these units.

➲WARNING: Always ensure free movement of air around the amplifier!

USA ONLY - DO NOT defeat the purpose of the polarised or grounding type plug. A polarised

plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

Follow all instructions and heed all warnings

KEEP THESE INSTRUCTIONS !

ENGLISH

1

2

Page 1 Page 3
Page 2
Image 2
Marshall Amplification MG250DFX, MG50DFX owner manual From Jim Marshall, Refer all servicing to qualified service personnel
Page 1 Page 3

MG50DFX, MG250DFX specifications

Marshall Amplification has long been synonymous with legendary guitar tone, and the MG series, particularly the MG250DFX and MG50DFX, embodies this tradition while incorporating modern technologies for today's musicians. Both models are part of Marshall's solid-state amplifier line, offering reliability, versatility, and impressive sound quality tailored for all skill levels.

The MG250DFX is a powerful 250-watt amplifier head, perfect for larger venues and stage performances. It features four channels to cover a diverse range of tones: clean, crunch, overdrive, and a second overdrive. This allows guitarists to switch easily between sparkling clean sounds and high-gain distorted tones without missing a beat. Essential to the MG250DFX is its Digital FX processor, which provides a wide array of effects, including reverb, delay, and chorus, allowing musicians to enhance their sound in real-time.

On the other hand, the MG50DFX is a more compact option, boasting 50 watts of power, making it suitable for practice environments, smaller gigs, and home use. Like its larger counterpart, it features four channels for versatile tone shaping. Both models include a built-in speaker emulator, which ensures that players can achieve great tone even when using the headphone output or direct outputs for recording.

An important characteristic of both amplifiers is their user-friendly interface, featuring intuitive controls that allow musicians to dial in their perfect sound quickly. The MG series incorporates Marshall’s unique tone shaping circuit that gives users the ability to sculpt their tone with precision.

The MG250DFX and MG50DFX both come equipped with the innovative M-Gain system, which optimizes gain structure to improve response and enhance tonal clarity. Additionally, these amplifiers are designed to be highly portable, with lightweight construction and robust build quality, ensuring they can withstand the rigors of transport.

In summary, the Marshall MG250DFX and MG50DFX amplifiers represent a fusion of classic Marshall tone and modern technology, catering to a wide range of playing styles and preferences. Whether on stage or in the studio, these amplifiers deliver exceptional sound that bolsters a guitarist's performance. With their multiple channels, built-in effects, and versatile controls, they are powerful tools for any musician seeking to expand their sonic palette.
Top Page Image Contents