Marshall electronic V-R53P instruction sheet Marshall, Warranty, Pins 4, 5, 9, 10, 14

Marshall

5.Tally - The tally system on the V-R53P is accessed via the DB-15 connector on the back of the unit. The

system works by closing the contacts between the ground pin and the corresponding LED pin. The system is self powered, DO NOT GIVE POWER TO THE PINS. The pinout is as follows:

Monitor 1	Green	Red	Yellow
	Pin 1	Pin 2	Pin 3
Monitor 2	Pin 6	Pin 7	Pin 8
Monitor 3	Pin 11	Pin 12	Pin 13

PINS 4, 5, 9, 10, 14 and 15

ARE COMMON GROUNDS

Warranty

Marshall Electronics warranties to the first consumer, that this V-R53Prackmount monitor will, under normal use, be free from defects in workmanship and materials, when received in its original container, for a period of one year from the purchase date.

This warranty is extended to the first consumer only and proof of purchase is necessary to honor the warranty. If there is no proof of purchase provided with a warranty claim, Marshall Electronics reserves the right, not to honor the warranty set forth above. Therefore, labor and parts may be charged to you.

This warranty does not apply to product exterior and cosmetics. Misuse, abnormal service or handling, improper alterations or modifications in design or construction, voids this warranty. No sales personnel of the seller, nor any other person is authorized to make any warranties other than those described above, or to extend the duration of any warranties on behalf of Marshall Electronics, beyond the time period described above.

Due to constant effort to improve products and product features, specifications may change without notice.