Martin Audio CS265 warranty Introduction, Unpacking

CONTENTS

< > PRINT GUIDES

This equipment conforms to the requirements of the EMC Directive 89/336/EEC, amended by 92/31/EEC and 93/68/EEC and the requirements of the Low Voltage Directive 73/23/EEC, amended by 93/68/EEC.

Standards Applied	EMC Emission	EN55103-1:1996
	Immunity	EN55103-2:1996
	Electrical Safety	EN60065:1993

ENGLISH

1 INTRODUCTION

Thank you for purchasing a Martin Audio CS265, a sub-bass system designed to be used with the C115 and C516 Contractor Series loudspeakers. It incorporates two powerful 6.5" (165mm) drive units in an ultra-compact enclosure.

2 UNPACKING

Each Martin Audio loudspeaker is built to the highest standard and thoroughly inspected before it leaves the factory. After unpacking the system, examine it carefully for any signs of transit damage and inform your dealer if any such damage is found. It is suggested that you retain the original packaging so that the system can be repacked at a future date if necessary.

Please note that Martin Audio and its distributors cannot accept any responsibility for damage to any returned product through the use of non-approved packaging.

All material © 2007. Martin Audio Ltd. Subject to change without notice. 2

Martin Audio – CS265