WW33
Arrayable three-way compact trapezoid system
Century Point, Halifax Road, Cressex Business Park,
High Wycombe, Buckinghamshire HP12 3SL, England.
Telephone: +44 (0)1494 535312 Facsimile: +44 (0)1494 438669
E-mail: info@martin-audio.com
All information is Copyright © 2006 Martin Audio Ltd.
www.martin-audio.com
5 of 5
touring and theatre

architectural and engineering specifications

The loudspeaker system shall be of the three-way bi-
amp type consisting of one 15" (380mm) direct radiating
reflex loaded low frequency transducer, one 6.5"
(165mm) cone driver mounted on a constant directivity
horn flare with integral toroidal waveguide and one 1"
(25mm) exit HF compression driver mounted on a
constant directivity horn in a trapezoidal plywood
enclosure. The enclosure shall be fitted with an integral
pole mounting socket and threaded inserts for wall and
ceiling mounting. The loudspeaker shall be operated
with a separate electronic controller providing a 650Hz
crossover between low and mid/high frequency
sections. Mid and high frequency sections shall be
integrated by an internal 3.3kHz passive crossover
network.
Performance of the loudspeaker system with its
electronic controller shall meet or exceed the following
criteria:
Frequency response measured 1 metre on axis shall be
55Hz-18kHz ±3dB.
High frequency dispersion at -6dB points shall be
65˚H x 40˚V.
Power handling shall be 400W AES, 1600W peak LF,
150W AES, 600W peak MF/HF.
Rated impedance shall be 8 ohms LF, 16 ohms MF/HF.
Maximum SPL measured at 1 metre on axis shall be
125dB continuous, 131dB peak.
Dimensions (W) 435mm x (H) 708mm x (D) 425mm
(17.1ins x 27.9ins x 16.7ins).
Weight 31.5kg (69lbs).
The loudspeaker system shall be the Martin Audio W3.
NNootteess
(1) Measured on-axis in half space at 2 metres, then referred to 1 metre.
(2) AES Standard ANSI S4.26-1984.
(3) Measured in half space at 2 metres with 1 watt input, using band limited pink noise, then referred to 1 metre.
(4) Measured in half space at 2 metres using band limited pink noise, then referred to 1 metre.
(5) Measured on-axis in open (4π) space at 2 metres, then referred to 1 metre.
(6) Measured in open (4π) space at 2 metres with 1 watt input, using band limited pink noise, then referred to 1 metre.
(7) Measured in open (4π) space at 2 metres using band limited pink noise, then referred to 1 metre.
TTrraaddee DDeessccrriippttiioonnss AAcctt
Due to Martin Audio’s policy of continuing improvement, we reserve the right to alter these specifications without prior notice.
Martin Audio is committed to refining state of the art sound reinforcement, combining in-depth product and field applications
research with advanced manufacturing techniques. Every Martin Audio product is built to the highest manufacturing standards
and rigorously tested to ensure that it meets the performance criteria specified in the design.
accessories
HTKWT3Y Flying yoke
HTKCT05 8mm Shouldered eye bolt
GPT060 Fitted enclosure flying points
HTKLIS Lightweight install stud
technical specifications
TYPE Compact bi-amplified three-way trapezoid
FREQUENCY RESPONSE (5) 55Hz-18kHz ±3dB
-10dB @ 45Hz
DRIVERS 15" (380mm) / 3" (75mm) voice coil
6.5" (165mm) horn loaded mid-range
1" (25mm) exit HF compression driver
RATED POWER (2) LF: 400W AES, 1600W peak
MF + HF: 150W AES, 600W peak
RECOMMENDED AMPLIFIER 400-550W into 4 ohms
SENSITIVITY (6) LF: 100dB
MF + HF: 104dB
MAXIMUM SPL (7) 125dB continuous, 131dB peak
NOMINAL IMPEDANCE LF: 8 ohms
MF + HF: 16 ohms
DISPERSION (-6dB) 65º horizontal, 40º vertical
CROSSOVER 650Hz active, 3.3kHz passive
FINISH Textured grey paint
PROTECTIVE GRILLE Grey perforated steel
CONNECTORS 2 x Neutrik NL4
FITTINGS 8 x M8
1 x mounting pole socket
2 x MAN blanking plates
2 x rear kelp fittings
DIMENSIONS (W) 435mm x (H) 708mm x (D) 425mm
(W) 17.1ins x (H) 27.9ins x (D) 16.7ins
WEIGHT 31.5kg (69lbs)