MartinLogan CLX user manual Glossary of Audio Terms

Models: CLX

1 28
Download 28 pages 63.39 Kb
Page 27
Image 27
Glossary of Audio Terms 27

Linearity.. The extent to which any signal handling process is accomplished without amplitude distortion.

Midrange.. The middle frequencies where the ear is the most sensitive.

Passive .crossover.. Uses no active components (transistors, IC’s, tubes) and needs no power supply (AC, DC, battery) to operate. The crossover in a typical loudspeaker is of the passive variety. Passive crossovers consist of capacitors, inductors and resistors.

Phase.. The amount by which one sine wave leads or lags a second wave of the same frequency. The difference is described by the term phase angle. Sine waves in phase reinforce each other; those out of phase cancel.

Pink .noise.. A random noise used in measurements, as it has the same amount of energy in each octave.

Polarity.. The condition of being positive or negative with respect to some reference point or object.

RMS.. Abbreviation for root mean square. The effective value of a given waveform is its RMS value. Acoustic power is proportional to the square of the RMS sound pressure.

Resistance.. That property of a conductor by which it opposes the flow of electric current, resulting in the generation of heat in the conducting material, usually expressed in ohms.

Resistor.. A device used in a circuit to provide resistance.

Resonance.. The effect produced when the natural vibra- tion frequency of a body is greatly amplified by reinforcing vibrations at the same or nearly the same frequency from another body.

Sensitivity.. The volume of sound delivered for a given electrical input.

Stator.. The fixed part forming the reference for the moving diaphragm in a planar speaker.

THD.. The abbreviation for total harmonic distortion. (See Distortion)

TIM.. The abbreviation for transient intermodulation distortion

Transducer.. Any of various devices that transmit energy from one system to another, sometimes one that converts the energy in form. Loudspeaker transducers convert elec- trical energy into mechanical motion.

Transient.. Applies to that which lasts or stays but a short time. A change from one steady-state condition to another.

Tweeter.. A small drive unit designed to reproduce only high frequencies.

Wavelength.. The distance measured in the direction of progression of a wave, from any given point characterized by the same phase.

White .noise.. A random noise used in measurements, as it has the same amount of energy at each frequency.

Woofer.. A drive unit operating in the bass frequencies only. Drive units in two-way systems are not true woofers but are more accurately described as being mid/bass drivers.

Glossary of Audio Terms 27

Page 27
Image 27
MartinLogan CLX user manual Glossary of Audio Terms