MartinLogan ESL Speaker manual Clstm mid-range, High frequency driver Vacuum formed, ±12dB, Inputs

C I N E M A T M

Cinema delivers reference center channel per- formance in an affordable, space-saving package. Shielded drivers for zero impact on picture quality. Add the optional mounting bracket for maximum flexibility in on-wall or set-top configurations.

Enables you to quickly and easily direct the sound to your listening position. Available in matte black. Single-wire connection.

Frequency response:	80-20,000 Hz ±3 dB
Sensitivity:	89 dB/2.83 volts/meter
Impedance:	6 ohms, 3.7 @20 kHz
Crossover frequency:	300, 3500 Hz
Woofer type:	5.25” (13cm) x 2,
	magnetically shielded
	in a sealed cabinet
CLSTM mid-range:	Patented CLSTM electro-
	static transducer
High frequency driver: Vacuum formed 1”
	(2.5 cm) soft dome
Power handling:	150 watts
Weight:	28 lbs., 12.7 kg each
Dimensions:	33.5”H x 10”W x 10.5”D
	85 x 25.4 x 27 cm w/stand

D E S C E N T T M

The challenge—design a dynamic subwoofer system meeting superior electrostatic transducer performance standards. The result—Descent —provides revolutionary levels of perform- ance and power with remarkably low distortion. The Descent features BalancedForce™ bass array, advanced servo monitoring and control, three ultra-low mass next generation ten-inch driv- ers and a lot more...

Frequency response: 20-150 Hz ± 3 dB Anechoic through the LFE effects input

Crossover frequency: 40, 70Hz

Phase:	0°, 90°, 180°, 270°
25Hz level control:	±12dB
Components:	3 x 10" high excursion woof-
	ers, BalancedForce™array
Amplifier:	400 watts RMS (800
	watts peak), 0.07% THD
Inputs:	RCA Line Level; RCA and
	XLR LFE
Outputs:	RCA
Weight:	95 lbs., 43.2 kg each
Dimensions:	21.75" H x 20" W x 18.25" D
	55.3 x 50.8 x 46.4 cm

F E A T U R E S & O P T I O N S

Most MartinLogan speaker systems are available with a range of optional hand-finished hardwood trim—from bottom: black oak, red aniline dye (additional aniline colors are also available), mahogany, light oak, dark oak, natural cherry, dark cherry, maple and walnut—in the reference illustration above.

The cabinetry is constructed from the finest com- posite material for acoustical integrity and coated with our proprietary matte black finish for lasting beauty. MartinLogan ETCTM—energy transfer coupler—spikes engage your speakers directly to the floor for increased definition and imaging.

Speaker systems feature custom engineered MartinLogan binding posts for audiophile grade, hand-tightened, signal connections.