INSTALLING YOUR BEVERAGE CENTER

Select Location

The proper location will ensure peak performance of your appliance. Choose a location where the unit will be out of direct sunlight and away from heat sources. Best perfor- mance will be maintained when installed within the follow- ing parameters:

Ideal Ambient Temperature Range

Built-In

65-80 °F

 

 

Free-Standing

65-90 °F

 

 

Cabinet Clearance

Ventilation is required from the bottom front section of the unit. Keep this area open and clear of any obstructions.

Leveling Legs

Adjustable legs at the front corners of the unit should be set so the unit is firmly positioned on the floor and the front is raised just enough so that the door closes easily when opened about halfway.

Turn leveling legs clockwise to raise unit, counterclockwise to lower it.

Door Hinge Reversing

You can change the door swing from right- to left-hand very easily. Simply unscrew the top and bottom hinge pin, lift the door off the bottom hinge, and switch the hinges to the other side. Screw the hinge pin back in what is now the bottom hinge, unscrew the hinge pin in what is now the top hinge, replace door, and screw the pin back in the top hinge.

Figure 1

Figure 2

Electrical Connection

Use nominal 115 VAC, 60 Hz only. DO NOT USE AN EXTENSION CORD.

Grounding Method

This product is factory equipped with a power supply cord that has a three-pronged, grounded plug. It must be plugged into a mating grounding type receptacle in accor- dance with the National Electrical Code and applicable lo- cal codes and ordinances (see Figure 1). If the circuit does not have a grounding type receptacle, it is the responsibility and obligation of the customer to exchange the existing receptacle in accordance with the National Electrical Code and applicable local codes and ordinances. The third ground prong should not, under any circumstances, be cut or removed (see Figure 2). All U.L. listed refrigerated prod- ucts are equipped with this type of plug.

2

Page 2 Page 4
Page 3
Image 3
Marvel Industries 3SBARE manual Installing Your Beverage Center, Ideal Ambient Temperature Range
Page 2 Page 4

3SBARE specifications

Marvel Industries has made a significant mark in the world of industrial automation with its latest innovation, the 3SBARE. This state-of-the-art system brings together cutting-edge technologies, designed specifically to enhance productivity, efficiency, and safety in various manufacturing processes.

One of the standout features of the 3SBARE is its advanced sensing technology. Equipped with state-of-the-art sensors, the system can detect operating conditions in real-time. This capability allows for rapid adjustments, ensuring optimal performance while minimizing risk. The integration of smart sensors not only enhances accuracy but also plays a crucial role in predictive maintenance. By analyzing sensor data, manufacturers can foresee potential failures before they occur, thereby reducing downtime and avoiding costly repairs.

In terms of connectivity, the 3SBARE leverages Industrial Internet of Things (IIoT) technologies. This allows it to connect seamlessly with existing machinery and software, creating a fully integrated environment. The system supports multiple communication protocols, including MQTT and OPC UA, enabling it to relay data to cloud platforms or local servers for analysis. This level of connectivity is essential for achieving a comprehensive overview of operations, ultimately driving informed decision-making.

The 3SBARE system is also notable for its user-friendly interface. A touchscreen control panel provides operators with easy access to system data and analytics. This intuitive design reduces the learning curve for new staff and increases overall operational efficiency. Moreover, the interface allows for remote monitoring and control, empowering management to oversee processes from anywhere in the facility or even remotely.

Another critical characteristic is its modular design. The 3SBARE can adapt to various manufacturing environments, making it suitable for industries ranging from automotive to electronics. Companies can select specific modules based on their operational needs, ensuring they invest only in what’s necessary, thus optimizing costs.

Finally, safety features are paramount in the design of the 3SBARE. It includes emergency stop functionality, obstacle detection, and automated alerts to ensure the well-being of operators and equipment alike. This focus on safety not only complies with industry standards but also fosters a culture of safety in workplaces.

In summary, Marvel Industries’ 3SBARE stands out due to its advanced sensing capabilities, IIoT connectivity, user-friendly design, modular adaptability, and robust safety features. This innovative system is set to redefine productivity and efficiency in manufacturing, making it a game-changer in industrial automation.
Top Page Image Contents