APPLIANCE FEATURES

Insert Wine Bottles

The four pull-out shelves each hold eight bottles. See Fig- ure 4 for typical wine bottle spacing. Tall bottles should not be loaded on the bottom rack because they may prevent the door from closing. The display shelf at the top of the cabinet holds seven bottles. Also, there is a fixed, wooden, bottle cradle in the bottom, step section of the cabinet. Six bottles of wine may be stored there.

Loading Tips and Suggestions

Bottom rack(s) may be removed for storing “jug” wines. You may store magnums and other large bottles on any of the racks (except for the top rack) by removing the rack directly above them. Position white wines on the middle or lower racks and red wines on the upper racks (see Figure 5).

The bottles on the top rack directly under the light will be exposed to a slightly higher temperature when the light is on. Position your wines accordingly and REMEMBER TO TURN OFF THE LIGHT WHEN IT IS NO LONGER NEEDED.

Keep wines that you plan to use for everyday drinking and entertaining on the front half of the racks where labels are completely visible. Place wines for aging or longer term storing in the rear.

Pull-out Racks

The four pull-out wine racks may be pulled out ap- proximately seven and a half inches to facilitate adding or removing bottles. DO NOT lean on or press down heavily on the wine shelves. Doing so may damage the shelves and the wine bottles stored on them. Pull the wine racks out gently and carefully to minimize unsettling your wine collection. AVOID pulling out more than one rack at any time to maintain stability.

Single Bottle Racks

Since bottles are not stacked on top of each other, you can easily view and access your inventory without disturbing other bottles (see Figure 6).

Front Bottles (Necks Facing Rear)

Rear Bottles (Necks Facing Front)

Figure 4

Figure 5

Figure 6

5

Page 5 Page 7
Page 6
Image 6
Marvel Industries 61WCM manual Appliance Features
Page 5 Page 7

61WCM specifications

Marvel Industries has made waves in the industry with its latest innovation, the Marvel Industries 61WCM, a cutting-edge piece of equipment designed to meet the evolving demands of modern manufacturing and assembly processes. Boasting a host of impressive features, technologies, and characteristics, the 61WCM stands out as a benchmark for quality and efficiency.

At the heart of the 61WCM is its high-performance automation capabilities. This model incorporates advanced automation technology that streamlines operations, reducing human error and increasing throughput. It utilizes smart sensors and real-time data analytics to monitor performance and ensure optimal functioning at every stage of production, contributing significantly to overall operational efficiency.

One of the standout features of the 61WCM is its modular design, allowing for easy adaptation and scalability according to specific production needs. This flexibility is crucial for businesses looking to optimize their workflow without the burden of significant reconfiguration. The modular setup enables companies to add or remove components based on demand fluctuations, ensuring that they remain agile in the marketplace.

Additionally, the 61WCM is equipped with state-of-the-art safety mechanisms. The integration of safety protocols and user-friendly interfaces ensures that operators can engage with the machine confidently and safely. This commitment to safety not only protects workers but also minimises the risk of production downtime due to accidents.

Power efficiency is another hallmark of the Marvel Industries 61WCM. The machine incorporates energy-saving technologies that comply with the latest environmental regulations, thus helping businesses reduce their carbon footprint while also cutting operational costs. The emphasis on energy efficiency aligns with the industry’s push towards sustainability without sacrificing performance.

Furthermore, the 61WCM features advanced connectivity options, facilitating seamless integration with existing manufacturing systems. This connectivity plays a crucial role in enabling predictive maintenance, where potential issues are identified before they impact productivity, thus saving time and reducing costs associated with unexpected repairs.

In summary, the Marvel Industries 61WCM is a game-changer in the manufacturing sector. Its high-performance automation, modular design, robust safety features, energy efficiency, and advanced connectivity set it apart from competitors. With these characteristics, the 61WCM positions itself as a reliable choice for forward-thinking manufacturers looking to enhance their productivity and adapt to an ever-changing market landscape.
Top Page Image Contents