Master Bilt QMVM-48 Technical Specifications, Listings, Hookup, Recommended Operating Conditions

QMVM SERIES

QUANTUM SERIES MEDIUM TEMP VERTICAL

OPEN DISPLAY MERCHANDISERS

TECHNICAL SPECIFICATIONS

	DIMENSIONS			DIMENSIONS							STANDARD
		(in.)			(mm)						SHELF	CAP.	SHIP	SHIP
									UNIT	NO. OF	WIDTH	CU.	CU.	WT.
MODEL	L	D	H	L	D	H	VOLTS	AMPS*	H.P.	SHELVES	(in inches)	FT.	FT.	LB/KG
QMVM-36	36	30	81	914	762	2057	208-230	13.5	1	3	14 x 311/8	13.6	89.0	525/239
QMVM-48	48	30	81	1219	762	2057	208-230	16.1	1	3	14 x 431/8	20.4	107.0	640/291
QMVM-72	72	30	81	1829	762	2057	115/208-230	3.7/13.7	11/2	6	14 x 331/16	31.5	152.0	860/391

*If condensate evaporator pan accessory is used, it must be field installed and requires a dedicated 15 amp, 120 volt circuit.

Note: 208-230/60/1 also requires neutral and safety ground wire.

PLAN VIEW

LISTINGS

SIDE VIEWELEVATION VIEW

HOOKUP

Electrical: QMVM-36 and QMVM-48 via plug in, 9 foot long
flexible four wire 208-230v 14/4 cord with neutral and ground
wires and molded plug. QMVM-72 is a hardwire.	NEMA L14-20P
Plumbing: Requires connection to customer’s drain
	(QMVM-36 & QMVM-48)

RECOMMENDED OPERATING CONDITIONS

• Merchandisers designed to hold product	• Should not be installed near HVAC vents,	• Factory installed controls should not be
in the 34° to 41°F (1° to 5°C) range	fans or doorways that will disrupt airflow	altered, removed or replaced without
• Designed to operate in air-conditioned	and compromise the function of the air	consent of the factory
stores where the maximum temperature is	screen inside the case	• Product must not be displayed in the cold
75°F and the maximum relative humidity	• Bottom shelf should not be loaded such	air curtain
is 55%	that the front air intake is obstructed
• Should not be installed in direct sunlight	• Floor drain should be properly trapped

BID SPECIFICATIONS

Item no. QMVM-_______________

Provide_______________( ) Quantum

Series Medium Temp Vertical Open Display Merchandiser(s), Master-Bilt model no. QMVM-__________.

Merchandiser to have standard electronic controller eliminating the need for a room thermostat, defrost termination/fan delay control, defrost timer and digital thermom-

eter or other temperature indicator. Other features will include adjustable

two-position shelves, independent shelf lighting, perforated interior back wall, elec- tric defrost and 2" foamed-in-place “zero ODP” urethane insulation.

The refrigeration system is to be self-con- tained, have a front condenser air intake and rear air discharge and use R-404A refrigerant.

The temperature range will be 34° to 41°F (1° to 5°C).

Merchandiser to have standard limited four year extended compressor warranty and one year limited parts and labor war- ranty.

Merchandiser to be UL and C-UL listed and UL EPH classified.

908 Highway 15 North • New Albany, MS 38652

PHONE: 800-647-1284 or 662-534-9061 • FAX: 800-232-3966 or 662-534-6049 • www.master-bilt.com All specifications subject to change without notice.

324-11/07-web ©Master-Bilt Products division of Standex International, Inc. All rights reserved. Printed in U.S.A.