Masterbuilt 20010306 operation manual Storage & Maintenance, Getting Ready, Mounting, Bracket

Storage & Maintenance

DANGER: Disconnect electric cord from outlet,before cleaning, servicing and/ or removing heating element. Electrical shock can result in personal injury or death.

•Turn appliance off, unplug and let cool for 2 hours if using water, 5 hours if using oil before cleaning or storing.

CAUTION: Do not pour used oil in

the sink. Drain it into a receptacle.

CAUTION:

Hold inner pot in with thumbs while pouring.

• Unused oil can be stored in appliance. Do not store water in appliance.

WARNING: Do not place fryer control panel under running water.

Immersing control panel and cord can cause electrocution.

•Clean plug, element and control panel with a damp cloth or sponge using a mild soap. All non-electric parts are dishwasher safe.

•When appliance is not in use, it must be unplugged from power supply.

Getting Ready

WARNING:

Do not use the appliance without water or oil. It can be severely damaged if heated while empty.

WARNING:

Do not immerse the control panel or cord in water.

NOTE:

There is a built-in safety trigger in the slots. Make sure slots are aligned to the mounting bracket, or unit will not turn on.

TOP OF

CONTROL

PANEL

•If desired, dismantle appliance for cleaning before initial use. Once unit is properly assembled, it can be used for frying, boiling and steaming.

•Clean the lid, inner pot, outer shield and basket with a damp cloth or sponge using a mild detergent. These parts can also be cleaned in the dishwasher.

•Clean cord, control panel and element with a damp cloth or sponge using a mild detergent. Never clean plug, cord, and control panel in the dishwasher.

•Dry thoroughly.

	• Attach Control Panel (A) to outer
Mounting	shield using mounting bracket.
Bracket	• Make sure the Control Panel
	(A) is correctly attached or
	appliance will not work. There
	is a built-in safety switch in
	mounting bracket in the
	Control Panel (A).

6 3