CLEANING AND MAINTENANCE
Continued
Replacing Saw Chain
Replace chain when cutters are too worn to sharpen or when chain breaks. Only use replacement chain noted in this manual. Always include new drive sprocket when replacing chain. This will maintain proper driving of chain. Note: For proper chain and drive sprocket, see Replacement Parts, below.
STORAGE
If storing saw for more than 30 days, follow steps below.
1.Drain oil tank.
2.Remove and clean guide bar and chain. Clean guide bar and chain by soaking in petroleum based solvent or mild soap and water mixture.
3.Dry guide bar and chain.
4.Place chain in container filled with oil. This will prevent rust.
5.Wipe a thin coating of oil over surface of guide bar.
6.Wipe off outside of saw body. Do this with soft cloth dampened with a mild soap and water mixture.
7.Store chain saw
•in a high or locked place, out of children’s reach
•in a dry place
•in a carrying case or with scabbard over guide bar
•with oil cap tight and saw upside down to prevent excess oil seepage
REPLACEMENT PARTS
!WARNING
Use only replacement parts described in this manual. Use of other parts could damage saw or injure operator.
Purchase these parts from your local dealer.
Part Number | Description |
Guide bar, 400 mm (16") | |
091375S | Chain, 400 mm (16") |
075752 | Drive sprocket |
Wrench/Screwdriver |
14 | 100549 |
|
