2 Matrox RG Series – User Guide
Overview
Thank you for purchasing a Matrox ATC RG product. This product is a complete remote graphics
solution. ATC RG-200DL units can support up to two monitors. These monitors can be dual or single
link digital monitors or analog monitors. ATC RG-400SL units can support up to four digital or
analog monitors. As a remote graphics solution, it separates the CPU and hard disks of your system
from the computer peripherals – monitors, keyboard, mouse, and audio hardware.
Hardware supplied
Hardware required
(sold separately)
Installation overview
To install your Matrox product:
1
Install your interface card – see “Hardware installation”, page 4.
2
Connect your ATC RG unit, monitors, and other peripherals
–
see “Connection setup”,
page 7.
Matrox ATC RG remote graphics unit
(ATC RG-400SL shown) 4 DVI-to-HD15 adapters
(ATC RG-400SL only) Power supply
*
* Multiple power cables are provided for international support.
Matrox PCI or PCIe interface card
(PCI card shown) Dual LC optical cable
(
50 µm/125 µm or 62.5 µm/125 µm
)