MaxTech XT-5871 user manual Appendix B - Video Cable Pinout, Appendix C - Power Saving Modes DPMS

Appendix B - Video Cable Pinout

Figure B-1 Pin Layout and Pin Assignment Chart

			PIN	SIGNAL	PIN	SIGNAL
			1	Red	9	No Pin
			2	Green	10	Ground
11	6	1
			3	Blue	11	Ground
			4	No Pin	12	SDA
1510			5	Ground	13	Hor. Synch.
		5
			6	Red Return	14	Vert. Synch
			7	Green Return	15	Data Clock
						(SCL)
			8	Blue Return

Appendix C - Power Saving Modes (DPMS)

VESA Display Power Management Signaling (DPMS) defines a method for a computer to signal the monitor to reduce its power consumption when idle. DPMS features must be supported by both the computer and the monitor. The monitor supports DPMS “SUSPEND” “STANDBY” and “OFF” modes. Computer support of DPMS requires the use of a DPMS compliant video card driver.

The monitor enters DPMS STAND-BY or SUSPEND mode when the computer turns off either the Horizontal or Vertical Synchronization signal. These power- saving modes reduce the monitor’s power consumption to 20W. While in these modes the selection indicator LEDs flash consecutively from right to left and then back. When the synchronization signals are re-enabled the monitor returns to normal operation.

The monitor enters DPMS OFF mode when the computer turns off both the Horizontal and Vertical Synchronization signals. This mode reduces the monitor’s power consumption to 1W. When the synchronization signals are re-enabled the monitor returns to normal operation.

Appendix D - Three Year Warranty

MAXTECH warrants to the original buyer of this product against defects in

7