3.0Configuring and mounting the drive

This section contains the specifications and instructions for configuring and mounting the drive.

3.1Handling and static-discharge precautions

After unpacking, and before installation, the drive may be exposed to potential handling and electrostatic dis- charge (ESD) hazards. Observe the following standard handling and static-discharge precautions:

Caution:

Before handling the drive, put on a grounded wrist strap, or ground yourself frequently by touching the metal chassis of a computer that is plugged into a grounded outlet. Wear a grounded wrist strap throughout the entire installation procedure.

Handle the drive by its edges or frame only.

The drive is extremely fragile—handle it with care. Do not press down on the drive top cover.

Always rest the drive on a padded, antistatic surface until you mount it in the computer.

Do not touch the connector pins or the printed circuit board.

Do not remove the factory-installed labels from the drive or cover them with additional labels. Removal voids the warranty. Some factory-installed labels contain information needed to service the drive. Other labels are used to seal out dirt and contamination.

DiamondMax 21 Serial ATA Product Manual, Rev. A

27

Page 35
Image 35
Maxtor 100451230 manual Configuring and mounting the drive, Handling and static-discharge precautions

100451230 specifications

The Maxtor 100451230 is a renowned hard drive that has carved a niche for itself in the realm of data storage solutions. Known for its reliability and performance, this hard drive has been widely utilized in various computing applications, ranging from personal desktops to enterprise-level servers.

One of the main features of the Maxtor 100451230 is its impressive storage capacity, capable of holding vast amounts of data, making it suitable for users with significant storage needs. The drive typically offers a storage size of 500GB, which is more than sufficient for everyday applications such as document storage, multimedia files, and software applications. This capacity positions it well in the competition, appealing to home users and professionals alike.

The Maxtor 100451230 operates on the IDE (Integrated Drive Electronics) interface, commonly known as PATA (Parallel ATA), which was a prevalent interface in earlier computing systems. This technology ensures compatibility with a wide range of older systems, making it an ideal choice for upgrades or replacements in legacy hardware. The drive’s interface allows for data transfer rates sufficient to meet the needs of many everyday tasks, although it may not match the speeds of modern SATA drives.

Built with a rotational speed of 7200 RPM (Revolutions Per Minute), the Maxtor 100451230 strikes a balance between speed and performance. The faster spin rate enhances read and write speeds, allowing users to access their data quickly, which is particularly beneficial for applications that require frequent data retrieval. This feature also contributes to an overall improved performance in multitasking environments.

In addition to its technical specifications, the Maxtor 100451230 incorporates robust data protection features. With built-in support for advanced error correction and a reliable data recovery mechanism, this hard drive provides users with a level of assurance that their data remains intact even in the event of unexpected issues.

Furthermore, it boasts a relatively low power consumption profile, making it an efficient choice for users concerned about energy use. The drive operates quietly, an essential characteristic for users who prioritize a quiet computing environment.

In summary, the Maxtor 100451230 stands out with its blend of capacity, compatibility, speed, and reliability. While newer technologies like SSDs have emerged, the Maxtor 100451230 remains a viable option for those looking for a dependable and efficient hard disk drive for their data storage needs.