Maxxsonics GPV700.2 manual GPV3000.1D PRO D CLASS 1 CHANNEL AMPLIFIER APPLICATIONS, Master, Slave

GPV3000.1D PRO D CLASS 1 CHANNEL AMPLIFIER APPLICATIONS

Basic application

SINGLE AMP INSTALLATION PROCEDURE:

1.Connect the amp LINE INPUTS to the Radio/CD player full range or mono line out puts with good quality RCA interconnect cables.

2.Plug in the GPR-1 bass remote module into the amp REMOTE INPUT jack.

3.Route a 0 gauge power cables directly to the vehicle battery with an in-line fuse.

4.Connect a 0 gauge ground cables directly to chassis ground with in 36” of the amp.

-Be sure to remove any paint or primer from the ground point.

-Use a nut, bolt and lock washer to secure the ground cable to the chassis ground.

5.Connect the subwoofer(s) in accordance to the diagrams below.

6.Make sure the MASTER/SLAVE switch is in the MASTER position.

Note: The amplifier will not work if the MASTER/SLAVE switch is in the Slave position

FULL RANGE
STEREO LINE INPUT	Y-ADAPTOR

NOT USED

Note: You can use the Radio/CD designated mono line output or a full range stereo line output. For full range stereo line output, you will need an optional “Y-Adaptor” as shown.

DESIGNATED

MONO OUTPUT FROM HEAD UNIT

MIN MAXX

GPR-1

R
			INPUT
R		L	OUTPUT
			BALANCED
	15 35Hz	INPUT
			SUBSONIC
	0dB		BASS
	10dB		EQ
			REMOTE
	35		LOW
	250Hz		PASS
	0 180		PHASE
	9V 0		LEVEL
	.2V
	PRO		PWR
INPUT SLAVE	OUTPUT MASTER
OUT		IN

30th ANNIVERSARY

GROUND POUNDER

		MONO
		SUBWOOFER
	+
SPEAKER	+
	-
	-
	REM	REMOTE TURN-ON
POWER	+12V GND	CHASSIS GROUND
		TO BATTERY + 12 Volts
		VIA FUSE

PARALLEL MONO

SUBWOOFERS

2 OHMS EACH MINIMUM

POWER				SPEAKER
+12V	GND	REM	-	-	+	+

DUAL AMP INSTALLATION PROCEDURE:

1.Connect the amp LINE INPUTS to the Radio/CD player full range or mono line out puts with good quality RCA interconnect cables.

2.Plug in the GPR-1 bass remote module into the amp REMOTE INPUT jack. This will allow the Master amp to control both Master and Slave amps with just one Remote..

3.Connect an RCA jumper cable from the Master amp MASTER OUTPUT to the Slave amp SLAVE INPUT. Note: This will “link” the amps so that the Master amp crossover switches will control both the Master and Slave amps. The Slave amp crossover switches will be bypassed.

4.Route two 0 gauge power cables directly to the vehicle battery with an in-line fuse.

5.Connect two 0 gauge ground cables directly to the chassis with in 36” of the amp.

-Be sure to remove any paint or primer from the ground point.

-Use a nut, bolt and lock washer to secure the ground cable to the chassis ground.

6.Make sure the Master amp MASTER/SLAVE switch is in the MASTER position. Make sure the Slave amp MASTER/SLAVE switch is in the SLAVE position.

7.Connect the subwoofer(s) in accordance to the diagrams below.

8.Connect a 12 gauge jumper from Master amp speaker - to Slave amp speaker - as shown below.

Linking two amps for single or dual subwoofer application

DESIGNATED

MONO OUTPUT

FROM HEAD UNIT

MIN MAXX

GPR-1

SINGLE REMOTE,

CONNECTED TO MASTER AMP, USED TO CONTROL BOTH AMPS WHEN LINKED

RCA JUMPER CABLE	MASTER OUTPUT TO SLAVE
	INPUT

R
			INPUT
R		L	OUTPUT
			BALANCED
	15 35Hz	INPUT
			SUBSONIC
	0dB		BASS
	10dB		EQ
			REMOTE
	35		LOW
	250Hz		PASS
	0 180		PHASE
	9V 0		LEVEL
	.2V
	PRO		PWR
INPUT SLAVE	MASTER	OUTPUT
		IN
R		L
			INPUT
R		L	OUTPUT
			BALANCED
	15 35Hz	INPUT
			SUBSONIC
	0dB		BASS
	10dB		EQ
			REMOTE
	35		LOW
	250Hz		PASS
	0		PHASE
	180
	9V 0.2V		LEVEL
	PRO		PWR
INPUT SLAVE	OUTPUT MASTER
OUT

MASTER

th ANNIVERSARY

OUTPUT

MASTER

INPUT

SLAVE

GROUND POUNDER

SLAVE

th ANNIVERSARY

OUTPUT

MASTER

INPUT

SLAVE

GROUND POUNDER

			POWER		SPEAKER	POWER	SPEAKER
			+12V	GND	REM - - + +	+12V GND	REM - - + +
	+
	+
SPEAKER -						DUAL VOICE COIL
-
	REM
							SUBWOOFER /
		12
							AMPLIFIERS NOT
POWER	GND+12V	GAUGEJUMPER					LINKED
			Amplifiers are stable to 2ohms when linked
		WIRE			SUBWOOFER

+

SPEAKER

+

-

-

REM

POWER

SPEAKER

POWER

SPEAKER

+12V

GND

REM

-

-

+

+

+12V

GND

REM

-

-

+

+

POWER +12V GND TWO SUBWOOFERS /

-	+	TWO AMPLIFIERS	-	+
		NOT LINKED

8