Maytag 750 warranty Oven Cooking, Control Panel, Using the Touchpads, Clock

Oven Cooking

Control Panel

A B C D E

F G H I JKL

The control panel is designed for ease in programming. The display window on the control shows time of day, timer and oven functions. Control panel shown includes model specific features. (Styling may vary depending on model.)

A	Bake	Use for baking and roasting.
B	Keep Warm	Use to keep cooked food warm in oven.
C	Broil	Use for broiling and top browning.
D	Toast	Use for toasting bread and products
		toasted in toaster or toaster oven.
E	Clean	Use to set self-clean cycle.
F	Delay	Programs the oven to start baking or
		cleaning at a later time.
G	Cook & Hold	Bakes for a preset time, then keeps food
		warm for 1 hour.
H	Timer	Sets timer.
I	Clock	Use to set time-of-day clock.
J	Oven Light	Use to turn the oven lights on or off.
K	Less-/More+	Enters or changes time, oven
		temperature. Sets HI or LO broil.
L	CANCEL	Cancels all operations except timer
		and clock.

Using the Touchpads

•Press the desired pad.

•Press More+ or Less- pad to enter time or temperature.

•A beep will sound when any pad is touched.

•A double beep will sound if a programming error occurs.

Note: Four seconds after pressing the More+ or Less- pad, the time or temperature will automatically be entered. If more than 30 seconds elapse between touching a function pad and the More+ or Less- pad, the function will be canceled and the display will return to the previous display.

Clock

The clock can be set to display time in a 12-hour or 24-hour format. The clock is set at the factory for the 12-hour format.

To change the clock to 24-hour format:

1. Press and hold the Upper Oven CANCEL and Delay pads for several seconds.

2.Press the More+ or Less - pad to select 12 or 24 hour.

3.Set the time of day following the directions below.

To set the Clock:

1. Press the Clock pad.

•The colon (:) flashes in the display.

2.Press More+ or Less- pad to set the time of day.

•Colon continues flashing.

3. Press the Clock pad again or wait four seconds.

• The colon stops flashing.

When electrical power is supplied or after a power interruption, the last clock time before power was interrupted will flash.

To recall the time of day when another time function is showing, press the Clock pad.

Clock time cannot be changed when the oven has been programmed for Bake, Clean, Delay or Cook & Hold.

cont.

8