SERVICE AND MAINTENANCE

Tank (Sediment) Cleaning

Sediment build-up on the tank bottom may create varying amount of noise, if left in the tank will cause permanent tank failure. In some water areas, sediment can be removed by draining off approximately one gallon of water each month.

Vent System Inspection

Flue gases may escape if vent pipe is not connected.

Be alert for obstructed, sooted or deteriorated vent system to avoid serious injury or death.

Do not store corrosive chemicals in vicinity of water heater.

Chemical corrosion of flue and vent system can cause serious injury or death

At least once a year a visual inspection should be made of the venting system. You should look for:

Obstructions which could cause improper venting. The combustion and ventilation air flow must not be obstructed.

Damage or deterioration which could cause improper venting or leakage of combustion products.

Rusted flakes around top of water heater.

Be sure the vent piping is properly connected to prevent escape of dangerous flue gasses which could cause deadly asphyxiation.

Obstructions and deteriorated vent systems may present serious health risk or asphyxiation.

Chemical vapor corrosion of the flue and vent system may occur if air for combustion contains certain chemical vapors. Spray can propellants, cleaning solvents, refrigerator and air conditioner refrigerants, swimming pool chemicals, calcium and sodium chloride, waxes, bleach and process chemicals are typical compounds which are potentially corrosive.

If after inspection of the vent system you found sooting or deterioration, something is wrong. Call Maytag Customer

Service at 1-800-788-8899 for an authorized servicer or your local gas supplier to correct the problem and clean or replace the flue and venting before resuming operation of the water heater.

Burner Inspection

Flood damage to a water heater may not be readily visible or immediately detectable. However, over a period of time a flooded water heater will create dangerous conditions which can cause DEATH, SERIOUS BODILY INJURY, OR PROPERTY DAMAGE. Contact the Maytag dealer from whom the appliance was purchased or call Maytag Customer Service at 1-800-788-8899 for an authorized servicer to replace a flooded water heater. Do not attempt to repair the unit! It must be replaced!

At least once a year a visual inspection should be made of the main burner and pilot burner, see Figure 24.

You should check for sooting. Soot is not normal and will impair proper combustion.

Soot build-up indicates a problem that requires correction before further use. Turn “OFF” gas to water heater and leave off until repairs are made, because failure to correct the cause of the sooting can result in a fire causing death, serious injury, or property damage.

FIGURE24.

Burner Cleaning

In the event your burner needs cleaning, following these instructions:

If inspection of the burner shows that cleaning is required, turn

the gas control knob clockwise ( ) to the “OFF” position, depressing slightly.

NOTE: The knob cannot be turned from “PILOT” to “OFF” unless knob is depressed slightly. DO NOT FORCE.

21

Page 21
Image 21
Maytag C3 Service and Maintenance, Tank Sediment Cleaning, Vent System Inspection, Burner Inspection, Burner Cleaning

C3 specifications

The Maytag C3 is a cutting-edge kitchen appliance that has gained significant recognition for its innovative features and exceptional performance. Designed with the modern home chef in mind, the C3 epitomizes convenience, efficiency, and style.

One of the standout features of the Maytag C3 is its advanced cooking technology. The appliance utilizes a powerful convection cooking system that ensures even heat distribution, allowing for perfectly cooked meals every time. This technology not only improves the quality of cooking but also enhances the appliance's energy efficiency, making it an eco-friendly choice for households.

The Maytag C3 also boasts a user-friendly interface, equipped with a digital touchscreen control panel that simplifies the cooking process. This intuitive design allows users to easily browse through a variety of pre-programmed cooking settings, ensuring you have the right option for every dish you prepare. The appliance supports smart cooking, connecting to a mobile app that provides step-by-step guidance, recipe suggestions, and remote control functions.

In terms of capacity, the C3 is designed to accommodate large meals with ease. The spacious interior allows you to cook multiple dishes simultaneously, making it ideal for family gatherings or dinner parties. Additionally, the appliance is equipped with multiple cooking modes, including bake, broil, grilling, and roasting, giving users the versatility they need in the kitchen.

Another notable characteristic of the Maytag C3 is its durable construction. Built from high-quality materials, this appliance is designed to withstand the rigors of daily use. The stainless steel finish not only adds a touch of elegance to your kitchen but also makes cleaning a breeze. The removable racks and trays are dishwasher-safe, ensuring that upkeep is minimal.

Safety is also a priority with the Maytag C3. The appliance features a child lock system, preventing accidental operation, which is particularly valuable for families with young children.

In summary, the Maytag C3 is a remarkable kitchen appliance that combines advanced cooking technology with user-friendly features. Its spacious capacity, versatility in cooking modes, and durable construction make it an excellent choice for anyone looking to elevate their home cooking experience. Whether you are a seasoned chef or a novice in the kitchen, the Maytag C3 is designed to meet your culinary needs with style and efficiency.