Maytag HN41240X, HN51240X manual Instructions for Operation contd, Temperature Regulation

Models: HN41240X HN51240X

1 36
Download 36 pages 30.29 Kb
Page 21
Image 21
Instructions for Operation (cont'd)

Instructions for Operation (cont'd)

Temperature Regulation

Due to the nature of the typical gas water heater, the water temperature in certain situations may vary up to 30°F higher or lower at the point of use such as, bathtubs, showers, sink, etc.

This means that when the temperature adjustment dial is set

at the mark approximating 120 ° F, the actual water tempera- ture at any hot water tap could be as high as 150°F or as low as 90°E

Turn the water temperature dial clockwise (ff"-_) to

decrease the temperature, or counterclockwise (_'-"_) to increase the temperature.

water is needed for cleaning (bodies, dishes, clothing). Hot water will present a scald hazard. Depending on the time ele- ment, and the people involved (normal adults, children, tod- dlers, elderly, infirm, etc.) scalding may occur at different temperatures.

Any water heater's intended purpose is to heat water. Hot

_,WARNING

HOTTER WATER CAN SCALD: Water heaters are

intended to produce hot water. Water heated to a temperature which will satisfy clothes washing, dish

washing, and other sanitizing needs can scald and permanently injure you upon contact. Some people

are more likely to be permanently injured by hot water than others. These include the elderly, children,

the infirm, or physically/mentally handicapped. If anyone using hot water in your home fits into one of

these c_roupsor if there is a local code or state law reqmrmg a certain temperature water at the hot

water tap, then you must take special precautions. In addition to using the lowest possible temperature

setting that satisfies your hot water needs, a means such as a mixing valve, should be used at the hot

water taps used by these people or at the water

heater. Mixing valves are available at plumbing sup- ply or hardware stores. Follow manufacturers instruc-

tions for installation of the valves. Before changing

the factory setting on the thermostat, read the "Temperature Regulation" section in this manual,

AWARNING

Never allow small children to use a hot water tap, or to draw their own bath water. Never leave a

child or handicapped person unattended in a bath-

tub or shower.

The thermostat of this water heater has been factory set at its lowest position, to reduce the risk of scald injury. It is adjustable and must be reset to the desired temperature set- ting. The mark (A) indicative of approximately 120°F is the preferred starting point. Some states have a requirement for a lower setting. If you need hotter water, follow directions for temperature adjustment, but beware of the warnings in this section.

o

_f_- _o

A- Is a thermostat setting of approximately 120°F, which will supply hot water at the most economical temperatures. The tempera- ture adjustment knob can be turned lower than 120°Fifdesired.

A- Is a thermostat setting of approximately 130 °F.

B- Is a thermostat setting of approximately

140°F.

C- Is a thermostat setting of approximately 150OE

VERYHOT- Is a thermostat setting of 160°F. It is recom- mended that the dial be set lower whenever

possible.

mended by most dishwasher manufacturers.

NOTE: Water temperature range of 120"-140°F recom-

_WARNING

Should overheating occur or the gas supply fail to shut off,

turn "OFF the manualgascontrolvalve to the appliance. I

21

Page 21
Image 21
Maytag HN41240X manual Instructions for Operation contd, Temperature Regulation, mended by most dishwasher manufacturers