Fabric Softener

Your washer is equipped with an automatic f:abric soft- ener dispenser. Add the recommended amount of fab- ric softener to the cup located in the top of the agitator. The cup may be lifted out for filling. Add warm water to bring liquid level to the indicated FILL LINE in the cup. Diluted fabric softener will automaticallybe added to the rinse. (Always dilute fabric softener with water.)

Do not interrupt the spin followi;_g the wash cycle because the softener will go iato the washtub at the wrong time.

The area in and around the dispenser cup should be flushed and cleaned with hot water and a soft brush

periodically,

LOADING THE WASHER

For best results, add measured amount of deter-

gent to washtub before adding the sorted clothes load.

Put d_, unfolded clothes loosely in the tub, up to the top row of holes for a maximum load. Do not pack or wrap items around the agitator. See MAYTAG LAUNDERING GUIDE for suggestions on sorting. Be sure to empty all pockets, mend any holes or tears and pretreat stains, spots and heavily soiled areas.

PAGE 3

Page 4
Image 4
Maytag LAT8824, LAT8804 warranty Loading the Washer, Fabric Softener