Maytag MAH7500 B

• Be sure the door is tightly closed.

• Plug cord into a live electrical outlet (tub light should illuminate).

• Check fuse or reset circuit breaker.

• Open and close the door,then push the START/PAUSE touchpad.

• Turn both faucets on fully.

• Straighten inlet hoses.

• Disconnect hoses and clean screens. Hose filter screens may be plugged.

• Open and close the door,then push the START/PAUSE touchpad.

• Check fuse or reset circuit breaker.

• Open and close the door and press the START/PAUSE touchpad.For your safety,the clothes washer

will not tumble or spin unless the door is closed.

• Press the START/PAUSE touchpad to stop the washer.

• It may take a few moments for the door lock mechanism to disengage.

• Open the door and wash the lower portion of the gray door seal with a solution of 1 cup chlorine

bleach to 2 cups water.

• Select the following control panel setting: Cotton Sturdy,Hot/Cold, Heavy soil setting.

• Fill the bleach dispenser cup with liquid chlorine bleach and star t the washer.

• Pour an additional 1/2 cup bleach into the detergent dispenser as the washer is filling.

• Allow the washer to complete the cycle.

• At the end of the cycle ,open the door and dry the gray door seal.

• Clothes washer should be leveled properly as outlined in installation instructions.

• Check the leveling leg lock nuts are tightened.

• Be sure rubber feet are installed on leveling legs.

• Weak floors can cause vibration and walking.

• For information on normal operating sounds,see page 20.

For further assistance,call Maytag Customer Service toll-free at 1-888-4-MAYTAG (1-888-462-9824).

U.S.customers using TTY for deaf,hearing impaired or speech impaired, call 1-800-688-2080.

Door Locked Shut;

Will Not Open

Freshening

Your Washer

Is Noisy

Won’t Fill

Won’t Tumble