6
For detailed information on sorting, pretreating stains, etc.,
see the enclosed Laundry Tips booklet.
Pull Control Dial Out to Start
•Add detergent and any additives.
•Add load and close lid.
•Pull out control knob to start.
You may stop the washer at any time by simply push-
ing the control dial IN. Therefore, it is possible to obtain
a non-agitated soak or to shorten, skip or repeat any
part of a cycle. The control dial must be pushed IN (off
position) when you change the setting.
Step 6
Step 5 (if desired)
Select Options
Extra Rinse (select models):
When the switch is in the “On” position, an extra rinse
is added to the end of the cycle to more completely
remove laundry additives, suds, perfumes, etc.
Extended Spin (select models):
When the switch is in the “On” position, extended spin
provides three extra minutes of spin to remove more
moisture from heavy loads such as towels.
Finger Faucet (select models):
Provides a flow of water when the switch is in the “On”
position.
•If the selected water level is reached, the finger
faucet will not operate.
•For your safety, the finger faucet will not operate if
hot wash is selected.
Control features vary by model.