INSTALLATION INSTRUCTIONS, CONT.

HOW TO CONNECT THE WATER SUPPLY

WARNING:

To reduce the risk of injury or death, follow basic precautions, including the following:

➢Read all instructions before installing device.

➢DO NOT attempt installation if instructions are not understood or if they are beyond personal skill level.

➢Observe all local codes and ordinances.

➢DO NOT service device unless specifically recommended in owner’s manual or published user- repair instructions.

➢Disconnect power to unit prior to installing device.

CAUTION:

To avoid property damage or possible injury, follow basic precautions, including the following:

➢Consult a plumber to connect copper tubing to household plumbing to assure compliance with local codes and ordinances.

➢Confirm water pressure to water valve is between 20 and 100 pounds per square inch. If water filter is installed, water pressure to water valve must be a minimum of 35 pounds per square inch.

➢DO NOT use a self-piercing, or 3⁄16" saddle valve! Both reduce water flow, become clogged with time, and may cause leaks if repair is attempted.

➢Tighten nuts by hand to prevent cross threading. Finish tightening nuts with pliers and wrenches. Do not overtighten.

➢Wait 24 hours before placing unit into final position to check and correct any water leaks.

MATERIALS NEEDED

➢1⁄4" outer diameter flexible copper tubing

➢Shut-off valve (requires a 1⁄4" hole to be drilled into water supply before valve attachment)

➢Adjustable wrench

➢1⁄4" hex nut driver

Note:

Add 8' to tubing length needed to reach water supply for creation of service loop.

1.Create service loop with tubing using care to avoid kinks in tubing.

2.Remove plastic cap from water valve inlet port.

3.Place brass nut (A) and sleeve (B) on copper tube end as illustrated.

A

B

4.Place end of copper tubing into water valve inlet port. Shape tubing slightly – DO NOT KINK – so that tubing feeds straight into inlet port.

5.Slide brass nut over sleeve and screw nut into inlet port. Tighten nut with wrench.

IMPORTANT: DO NOT overtighten. Cross threading may occur.

6.Pull on tubing to confirm connection is secure. Connect tubing to frame with water tubing clamp (C) and turn on water supply. Check for leaks and correct, if present.

C

7.Monitor water connection for 24 hours. Correct leaks, if necessary.

8

Page 5 Page 7
Page 6
Image 6
Maytag MCS 16021937 HOW to Connect the Water Supply, Materials Needed, ⁄4 outer diameter flexible copper tubing
Page 5 Page 7

MCS 16021937 specifications

The Maytag MCS 16021937 is an impressive addition to the line of kitchen appliances, particularly known for enhancing modern culinary experiences. This countertop microwave offers a blend of convenience, efficiency, and advanced features tailored to meet diverse cooking needs.

One of the standout features of the MCS 16021937 is its large capacity. With an interior that accommodates family-sized portions, users can easily reheat leftovers or prepare meals for a gathering without the frustration of limited space. The sleek exterior design, complemented by a stainless-steel finish, not only ensures durability but also enhances the aesthetic appeal of any kitchen.

Equipped with a powerful microwave system, the MCS 16021937 is engineered for rapid and even cooking. This model utilizes smart inverter technology, allowing for more precise temperature control, which helps in achieving perfect results every time. This innovation ensures that delicate items like melted chocolate and reheating sauces do not overcook, preserving flavor and texture.

Another notable feature is the one-touch cooking function. Users can select quick settings for commonly microwaved foods, ranging from popcorn to pizza, making meal preparation more straightforward and less time-consuming. The MCS 16021937 also features a comprehensive range of power levels, providing versatility for multiple cooking tasks, from defrosting frozen goods to cooking full meals.

The appliance is designed with safety in mind, boasting a child lock feature. This functionality allows parents to ensure safety in the kitchen, preventing unintended use by young children. Additionally, the easy-to-read digital display simplifies operation, providing clear indications of settings and cooking time.

In terms of maintenance, the Maytag MCS 16021937 stands out with its easy-clean interior, which allows for hassle-free cleaning after spills or splatters. This is particularly beneficial for busy households, where time and convenience are crucial.

Overall, the Maytag MCS 16021937 is a versatile and reliable microwave that combines modern technology with user-friendly features. Whether reheating, defrosting, or cooking, this appliance proves itself to be a valuable companion, making meal preparation an efficient and enjoyable process. With its thoughtful design and robust performance, it is a worthy investment for any kitchen.
Top Page Image Contents