Step 2 Cont.

Time Dry Air Fluff

This cycle can be used to regulate the drying time. Use with Air Fluff, Low, Medium (Select Models) or Regular temperature settings. For timed drying, turn the control dial until the pointer points to the proper time setting in the Time Dry Air Fluff cycle.

NOTE: Using the Air Fluff temperature setting will require a longer drying time.

Special Options

Damp Dry is located on the Time Dry Air Fluff sec- tion of the dial. It is designed to partially dry items and can be used with any temperature selection. Damp Dry will provide 20 minutes of tumbling time, followed by 5 minutes of cool-down tum- bling.

Wrinkle Release will release wrinkles from items that are clean and dry but only slightly wrinkled, such as from a crowded closet or suitcase, or from sit- ting in the dryer too long after the cycle has ended. Wrinkle Release provides 10 minutes of tumbling followed by five minutes of cool-down tumbling and can be used with any temperature selection.

Step 3

Press Start

Push this button to start the dryer. The dryer door must be shut for the dryer to operate. If the door is opened during the cycle, the Start button must be pushed again to resume the cycle once the door is closed.

End of Cycle Signal

Shortly before the cycle is complete, an audible signal will sound.

NOTE: The dial can be turned in either direction to select a cycle. Once started, the dial will not advance at a specific rate during the Auto Dry cycles. At first the dial may not advance at all. Toward the end of the cycle (when the load begins to dry) the dial will advance at a more regular rate and much more quick- ly. This is normal operation.

4

Page 5
Image 5
Maytag MD-21 operating instructions Cont, Step Press Start, Time Dry Air Fluff, Special Options, End of Cycle Signal