![](/images/new-backgrounds/1135342/1353429x1.webp)
Operating lips ..... ................................................
Clean the Lint Filter...
•after each load.
•to shorten drying time.
•to operate more energy efficiently.
NOTE: Do not operate the dryer without the lint filter in place.
Load the Dryer Properly...
•by placing only one wash load in the dryer at a time.
• avoid very | small loads or mixing heavyweight and | / |
lightweight | clothes. |
|
•when only one or two articles need drying, add a few similar items to improve tumbling and drying efficiency.
N2_
Add A Fabric Softener Sheet...
(If Desired)
•after loading the dryer.
•to control static cling.
•before the load becomes warm. This helps prevent
•and remove any used softener sheets from the dryer to prevent
Check the Moisture Monitor...
Indicator lights in the moisture monitor will display when an IntelliDry cycle is in operation. The top light will blink on and off. As loads dry, there will be longer pauses between each blink. No lights will display during Time Dry or during the Dryel Fabric Care cycle,
The bottom light in the monitor will remain on until the cool down portion of the cycle starts. During cool down the dryer continues to tumble the load in unheated air to help minimize wrinkling.
MOISTURE MONITOR
| NOTE: The top monitor |
MORE | light may not blink when |
| small loads of heavy, bulky |
| items are dried, such as large |
LESS | rugs or sweaters. |
4