Refrigerator Door(s) and Drawer

TOOLS NEEDED: ⁵⁄₁₆", ³⁄₈", ¹⁄₄" hex head socket wrench, a Torx®† T20 screwdriver, a #2 Phillips screwdriver, and a flat-blade screwdriver.

IMPORTANT:

■Your refrigerator may have a standard reversible refrigerator door with either a freezer door or freezer drawer, or French doors. Follow the instructions specific to the door style of your model.

■All graphics referenced in the following instructions are included later in this section after “Final Steps.” The graphics shown for the standard door are for a right-hand swing refrigerator (hinges factory installed on the right).

■If you only want to remove and replace the doors, see “Remove Door(s) and Hinges” and “Replace Door(s) and Hinges.”

■Before you begin, turn the refrigerator control OFF, and remove food and adjustable door or utility bins from the doors.

Remove and Replace Refrigerator Door Handles

Standard Door

■To remove the handle, remove the screw attaching the trim to the upper end of the handle. Using a flat-blade screwdriver wrapped in masking tape, pry the trim piece from the lower end of the handle. Then, remove the screws attaching the handle to the door. See Graphic 2.

■To replace handle, reverse directions.

French Doors

Style 1 Handles

■Using a ³⁄₃₂" or ¹⁄₈" hex key, loosen the two setscrews located on the side of each handle. Pull the handle straight out from the door. Make sure you keep the screws for reattaching the handles. See Style 1 Handle, graphic 1.

■To replace the handles, reverse the directions.

Style 2 Handles

■To remove the handle, grasp the lower part of the handle firmly, slide the handle up and pull the handle straight out from the door. See Style 2 Handle, graphic 1.

■To replace the handle, position the handle so that the large holes in the mounting clips are down and align the holes with the door studs. Rotate the handle so that the mounting clips are flat against the door and slide the handle down to engage. See Style 2 Handle, graphic 1.

Remove Door and Hinges

Standard Door

⁵⁄₁₆" Hex-Head Top Hinge Screw

Freezer drawer models

1.Unplug refrigerator or disconnect power.

2.Keep the refrigerator door closed until you are ready to lift it free from the cabinet.

NOTE: Provide additional support for the door while the hinges are being moved. Do not depend on the door gasket magnets to hold the door in place while you are working.

3.Remove the parts for the top hinge as shown in Top Hinge graphic. Lift the refrigerator door free from the cabinet.

4.Remove the parts for the bottom hinge as shown in Bottom Hinge graphic.

Freezer door models

1.Unplug refrigerator or disconnect power.

2.Keep the freezer door closed until you are ready to lift it free from the cabinet.

NOTE: Provide additional support for the door while the hinges are being moved. Do not depend on the door gasket magnets to hold the door in place while you are working.

3.Remove the parts for the top hinge as shown in Top Hinge graphic. Lift the refrigerator door free from the cabinet.

4.Remove the center hinge pin and remove the hinge screws as shown in the Center Hinge graphic. Lift the freezer door free from the cabinet.

5.Remove the base grille by grasping the grille firmly with both hands and pulling it toward you.

6.Remove the parts for the bottom hinge as shown in Bottom Hinge graphic.

French Doors

WARNING

Electrical Shock Hazard

Disconnect power before removing doors.

Failure to do so can result in death or electrical shock.

1.Unplug refrigerator or disconnect power.

2.Keep the refrigerator doors closed until you are ready to lift them free from the cabinet.

NOTE: Provide additional support for the refrigerator door while the hinges are being removed. Do not depend on the door gasket magnets to hold the door in place while you are working.

†®TORX is a registered trademark of Saturn Fasteners, Inc.

6

Page 5 Page 7
Page 6
Image 6
Maytag MFF2558VEM Refrigerator Doors and Drawer, Remove and Replace Refrigerator Door Handles Standard Door, French Doors
Page 5 Page 7

W10366207A, MFF2558VEM specifications

The Maytag MFF2558VEM is a sophisticated and reliable refrigerator designed to cater to the modern user's needs. It combines functionality and style, making it a perfect addition to any kitchen. This model comes with a host of features that enhance its usability and performance, making it stand out in its class.

One of the main attributes of the Maytag MFF2558VEM is its spacious interior. With a total capacity of 25 cubic feet, there's plenty of room for groceries, beverages, and storage containers. The refrigerator layout is thoughtfully designed, offering adjustable shelves and a crisper drawer that helps keep fruits and vegetables fresher for longer. The humidity-controlled crisper drawers ensure optimal conditions for your produce, preventing spoilage and maintaining freshness.

The refrigerator boasts an advanced cooling system that employs precise temperature control technology. This feature allows users to customize and maintain their desired temperature settings throughout the refrigerator and freezer compartments, ensuring food remains at the ideal temperature. The EvenTemp cooling system circulates cool air throughout the unit, eliminating hot spots and ensuring consistent cooling.

Another significant feature is the water and ice dispenser, which is conveniently located on the exterior door. This provides easy access to filtered water and cubed or crushed ice, making it effortless to stay hydrated or prepare meals. The filtration system ensures that the water supplied is clean and refreshing, crucial for health-conscious consumers.

Energy efficiency is another hallmark of the Maytag MFF2558VEM. It is ENERGY STAR certified, meaning it meets strict guidelines for energy consumption. This reduces environmental impact while saving on utility bills, making it an eco-friendly choice.

The stainless steel finish not only gives the refrigerator a sleek look but is also smudge-resistant, ensuring it maintains its aesthetic appeal with minimal effort. The strong build quality of Maytag products ensures durability and performance reliability, making this model a long-term investment.

In addition to its practical features, the Maytag MFF2558VEM includes a 10-year limited parts warranty on the compressor, providing peace of mind for users concerned about potential repairs. Overall, this refrigerator embodies a blend of technology, convenience, and efficiency, making it an ideal partner in any busy kitchen. With its robust set of features and durable construction, it promises to deliver excellent refrigeration performance for years to come.
Top Page Image Contents