30" (76.2 cm) and 36" (91.4 cm) Sealed Gas Cooktop
PRODUCT MODEL NUMBERS
MGC4430BDMGC4436BD
Gas supply: The installation of this appliance must conform with local codes, or in the absence of local codes, with the latest edition of the National Fuel Gas Code ANSI Z223.1 USA or current
INSTALLATION CODE.
This appliance is designed to operate at a pressure of 5" of water column (36" models), 4" of water column (30" models) on natural gas or, if converted for use with LP gas (propane or butane), 10 " water column. Make sure this appliance is supplied with and adjusted for the type of gas for which it is designed.
This appliance was adjusted at the factory for use with natural gas. If, at any time, this appliance is to be used with a different type of gas, all of the conversion adjustments described in the installation instructions must be made by a qualified service technician before attempting to operate the cooktop on that gas. Natural gas should be supplied to the appliance pressure regulator at a line pressure between 6" – 14" of water column or, if converted for LP gas, between 11"– 14".
All supply piping, except as noted, should use common National Pipe Thread (N.P.T.). For all pipe connections use an approved pipe joint compound resistant to the
PRODUCT DIMENSIONS – 30" MODEL
E
F
B
A
C
GH
action of LP gas.
The supply line must be equipped with a manual shutoff valve. This valve should be located in the same room but external to the range. It should be in a location that allows ease of opening and closing.
Electrical: See page 2.
PRODUCT DIMENSIONS – 36" MODEL
Dimensions
"A" | (72.4 cm) | |
"B" | (50.6 cm) | |
"C" | (5.4 cm) | |
"D" | (13.3. cm) | |
"E" | (74.9 cm) | |
"F" | 21" | (53.3 cm) |
"G" | (9.7 cm) | |
"H" | (31.1 cm) |
IMPORTANT: Cutout dimensions are critical. Dimensions must be measured and cut accurately to within ±1/16" (0.159 cm) to ensure proper fit.
E
G
F
B
A
C
Dimensions
"A" | (87.6 cm) | |
"B" | (50.6 cm) | |
"C" | (5.4 cm) | |
"D" | (13.3. cm) | |
"E" | 36" | (91.4 cm) |
"F" | 21" | (53.3 cm) |
"G" | (9.7 cm) | |
"H" | (38.7 cm) |
D
H
IMPORTANT: Cutout dimensions are critical. Dimensions must be measured and cut accurately to within ±1/16" (0.159 cm) to ensure proper fit.
|
| Page 1 of 2 |
Because Whirlpool Corporation policy includes a continuous commitment to improve | Dimensions are for planning purposes only. For complete details, see Installation | Ref. W10187822 |
our products, we reserve the right to change materials and specifications without notice. | Instructions packed with product. Specifications subject to change without notice. |
