Important safety information
Installation instructions
This appliance is equipped with a three- prong grounding plug for your protection against possible electrical shock hazards. It must be plugged into a grounding receptacle. Where a standard
Power supply cord with
Grounding type wall receptacle
REMOVE PACKING
MATERIALS:
Remove materials, tape and labels before using the freezer.
Do not use sharp instruments, rubbing alcohol, flammable fluids or abrasive cleaners. These can damage the material.
Clean your freezer before using it:
1.Use a sponge, cloth or paper towel and mild detergent in warm water to clean outside and inside of freezer, door liner and gasket.
2.Rinse and dry thoroughly.
CHOOSE FREEZER
LOCATION:
1.Locate the freezer in a safe place, indoors, away from direct sunlight or heat sources such as a range, dish- washer, laundry equipment, heat vents or radiator.
2.DO NOT store flammables such as gasoline near the freezer.
3.Check the strength of the floor. It should hold the weight of a fully loaded freezer.
4.Allow at least 3" (7.5 cm) on all sides to allow for proper air circulation around the freezer.
5.If the freezer is to be against a wall, you might want to leave extra space on the hinge side so the lid can be opened wider.
6.If the location selected for your freezer is damp or moist, as in some base- ments, place freezer on wooden blocks (at least 2 or 3 boards under the entire length of the freezer are needed for adequate support).
7.The freezer must be level for proper operation.
8.DO NOT install the freezer on a car- peted floor.
9.This freezer is designed to operate at a household temperature of 40° to 90° F (4° to 32° C).
4
