5
USING THE CONTROLS
Step 3
Press the arrow pad to select the spin speed.
Max Extract or Max Extract Plus (select models) –Use for heavy
loads such as towels and bedding.Removes more water from loads during
spin.
High (select models) –Use for underwear,t-shirts, jeans and sturdy cottons.
Medium – Use for jeans,wrinkle free or “wash-and-wear” items and
synthetics.
Gentle –Use for items that will be hung up or laid flat to dry.
Low – Use for delicate items needing a slow spin speed because of fabric and
construction.
Drain Only (select models) –Drains the washer without spinning.Use for
extremely delicate items that cannot tolerate any spin.
SELECT SPIN SPEED
FABRICS NOTE:To minimize wrinkling of wrinkle free and no-iron
fabrics,do not use the Max Extract or Max Extract Plus spin option for
these loads. Also, DO NOT overload the washer.
Step 2
Press the arrow pad to select the wash and rinse water temperatures.Follow
the garment care label and chart below for best results.
Sanitary/Cold (select models) – Heavily soiled,colorfast items. Only avail-
able with the Sanitary cycle.
Hot/Cold – Whites and heavily soiled color-fast items.
ATC Warm/Warm – Color-fast items.When warm rinse is selected, only
the final rinse will be warm.The other rinses will be cold to conserve energy.
ATC Warm/Cold – Moderately soiled, color-fast items;most wrinkle free
items.
ATC Cold/Cold – Brightly colored, lightly soiled items.
Cold/Cold – Brightly colored,very lightly soiled items; washable woolens.
SELECT WASH/RINSE WATER TEMPERATURES
IMPORTANT: The washer features an automatic temperature control (ATC) to provide a warm wash of approximately 105˚ F,a cold wash of
approximately 65˚ F and a warm rinse of approximately 80º F in the final rinse only on the ATC temperature selections.
REMEMBER: In wash water temperatures below 65˚F,detergents do not dissolve well or clean well.
Control features vary by model.