7
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
Mantel
Floor Protection
Combustible Wall
6”
(152mm)
9-1/2”
(241mm)
7-1/2”
(191mm)
10”
(254mm)
Max.
6”
(152mm)
23-3/8”
(594mm)
3”
(76mm)
1-1/2”
(38mm)
The floor protector must be a non-combustible material extending
beneath the insert from the surround panels forward and to the front
and sides as shown in Figure 7. Important, if anything other than a
masonry hearth is used in the installation you must use the Heat Kit
(Cat. No. 79024).
Minimum Size Floor Protection
Outline of Insert Base
Zero Clearance Kit and Heat Kit Installation
The Winslow™ PI40 insert has a Zero Clearance Kit (Cat. No. 79025) and
a Heat Kit (Cat. No. 79024) approved for new construction or remodel
installations. See Zero Clearance and Heat kit installation instructions at
the back of this manual for requirements. Both kits have been tested and
approved through OMNI Testing Laboratories Inc.
6”
(152mm)
6”
(152mm) 3”
(76mm)
3”
(76mm)
6”
(152mm)
Insert Base
Firebox Front Edge
Floor Protection
31-3/4”
(807mm)
7-7/16”
(189mm)
19-1/4”
(489mm)
6-11/16”
(170mm)
6-11/16”
(170mm)
18-3/8”
(467mm)