Maytag W10097016A-SP Select the desired cycle, Select cycle options if desired, Setting modifiers

4. Select the desired cycle 6. Select cycle options (if desired)

Select the desired cycle for your load. See the “Cycle Guide” or the display for more information about each cycle.

5. Setting modifiers

The default cycle settings will be shown. For some cycles, you may select alternate settings by pressing the button for that setting. Time adjusts for Timed Cycles only.

NOTE: Not all modifiers are available with all cycles.

Temp Level

Press the TEMP LEVEL button to change the drying temperature from the default setting.

Wrinkle Prevent feature

nGet up to 60 or 150 minutes for models with two choices, 90 minutes for models with only one choice of heat-free, periodic tumbling at the end of a cycle. Press the WRINKLE PREVENT button to turn ON or OFF at any time before the cycle has ended.

nThe WRINKLE PREVENT feature is preset to “OFF.” If selected for other cycles, the WRINKLE PREVENT feature setting will remain “ON” the next time that cycle is selected.

Add additional options by pressing the button.

NOTE: Not all options and settings are available with all cycles.

7. Press START/PAUSE to begin cycle

Press the START/PAUSE button to begin the cycle.

8. Remove garments promptly after cycle is finished

Promptly remove garments after cycle has completed to reduce wrinkling. Use the Wrinkle Prevent feature to avoid wrinkling when you are unable to remove a load from the dryer as soon as it stops.

8