Maytag M8RXEGMXS Troubleshooting, Changing the Light Bulbs, Refrigerator Operation, Freezer Light

4.Clean the condenser coils regularly. Coils may need to be cleaned as often as every other month. This may help save energy.

■Pull refrigerator out away from the wall. See “Unpack the Refrigerator.”

■Vacuum coils when they are dusty or dirty.

■Roll refrigerator back into place. Make sure to leave 1" (2.5 cm) between the cabinet back and the wall.

■Check to see that the refrigerator is level.

5.Plug in refrigerator or reconnect power.

Changing the Light Bulbs

NOTE: Not all appliance bulbs will fit your refrigerator. Be sure to replace the bulb with one of the same size, shape, and wattage.

Refrigerator Light

1.Unplug refrigerator or disconnect power.

2.Reach behind the control panel and unscrew the bulb.

3.Replace the bulb with a 40-watt appliance bulb.

4.Plug in refrigerator or reconnect power.

Freezer Light

1.Unplug refrigerator or disconnect power.

2.Remove the freezer shelf.

3.Remove the freezer light shield by pushing down.

4.Remove the light bulb and replace with one of the same size, shape and wattage.

5.Replace the light shield.

6.Plug in refrigerator or reconnect power.

TROUBLESHOOTING

First try the solutions suggested here or visit our website and reference FAQs (Frequently Asked Questions)

to possibly avoid the cost of a service call.

In the U.S.A., www.maytag.com In Canada, www.maytag.ca

Refrigerator Operation

The refrigerator will not operate

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

■Power cord unplugged? Plug into a grounded 3 prong outlet.

■Is outlet working? Plug in a lamp to see if the outlet is working.

■Household fuse blown or circuit breaker tripped? Replace the fuse or reset the circuit breaker. If the problem continues, call an electrician.

■Control(s) on? Make sure the refrigerator control is on. See “Using the Control(s).”

■New installation? Allow 24 hours following installation for the refrigerator to cool completely.

NOTE: Adjusting the temperature control(s) to coldest setting will not cool the refrigerator more quickly.

The motor seems to run too much

Your new refrigerator may run longer than your old one due to its high-efficiency compressor and fans. The unit may run even longer if the room is warm, a large food load is added, the door is opened often, or if the door has been left open.

11