Venting REQUiREMENTS, Rigid metal vent, Elbows

Venting REQUiREMENTS

WARNING

Fire Hazard

use a heavy metal vent. Do not use a plastic vent. Do not use a metal foil vent.

Failure to follow these instructions can result in death or fire.

WARNING: To reduce the risk of fire, this dryer MUST BE EXHAUSTED OUTDOORS.

IMPORTANT: Observe all governing codes and ordinances.

Dryer exhaust must not be connected into any gas vent, chimney, wall, ceiling, attic, crawlspace, or a concealed space of a building. Only rigid or flexible metal vent shall be used for exhausting.

nOnly a 4" (102 mm) heavy metal exhaust vent and clamps may be used.

n Do not use plastic or metal foil vent.

Rigid metal vent:

■■ Recommended for best drying performance and to avoid crushing and kinking.

Flexible metal vent: (Acceptable only if accessible to clean) ■■ Must be fully extended and supported in final dryer location.

■■ Remove excess to avoid sagging and kinking that may result in reduced airflow and poor performance.

■■ Do not install in enclosed walls, ceilings, or floors. ■■ The total length should not exceed 73/4 ft. (2.4 m).

NOTE: If using an existing vent system, clean lint from entire length of the system and make sure exhaust hood is not plugged with lint. Replace plastic or metal foil vents with rigid metal or flexible metal vents. Review Vent system chart and if necessary, modify existing vent system to achieve best drying performance.

Exhaust hoods:

■■ Must be at least 12" (305 mm) from ground or any object that may obstruct exhaust (such as flowers, rocks, bushes, or snow).

	4"	C
A	(102 mm)
A
4"		2½"
(102 mm)		2½"
(102 mm)		(64 mm)
		(64 mm)
4"
(102 mm)
Recommended styles:	Acceptable styles:
A. Louvered hood	C. Angled hood
B. Box hood

■■ An exhaust hood should cap vent to keep rodents and insects from entering home.

■■ Do not use exhaust hood with a magnetic latch.

Elbows:

■■ 45° elbows provide better airflow than 90° elbows.

GoodBetter

Clamps:

■■ Use clamps to seal all joints.

■■ Exhaust vent must not be connected or secured with screws or other fastening devices that extend into interior of duct and catch lint. Do not use duct tape.

W10240579B, W10240583B-SP specifications

The Maytag W10240583B-SP and W10240579B are standout appliance components designed to enhance the performance and reliability of various Maytag washing machines. These model numbers refer to high-quality replacement parts that exemplify the brand's dedication to durability, innovative technologies, and user-centric design.

One of the main features of both the W10240583B-SP and W10240579B is their robust construction. Made from high-grade materials, these components are engineered to withstand the rigors of daily use, ensuring a long lifespan. The parts are built to meet rigorous quality standards, which is particularly important in a home appliance environment where reliability is crucial.

Both parts also integrate advanced technologies that improve washing efficiency. For instance, they are designed to work in synergy with Maytag’s Dynamic Vibration Control system. This technology minimizes noise and vibrations, making laundry days significantly quieter and more pleasant. Such advancements cater to consumers’ needs for tranquility in their homes, echoing broader trends toward quieter home appliances.

Additionally, energy efficiency is a significant characteristic of the W10240583B-SP and W10240579B. These components support the operation of washing machines that are designed to consume less water and energy, which is essential in today's eco-conscious market. By ensuring the optimal functioning of the appliance, these parts play a crucial role in helping users save on utility bills while also being kind to the environment.

Moreover, ease of installation is a hallmark of both models, often requiring merely a few tools and minimal technical know-how. This user-friendly aspect allows homeowners to replace these components without the need for professional assistance, thus saving time and money.

In conclusion, the Maytag W10240583B-SP and W10240579B embody the brand's commitment to quality and performance. With features that enhance durability, noise reduction, energy efficiency, and ease of installation, these components are excellent choices for those looking to maintain their Maytag washing machines in peak condition. As consumers increasingly prioritize reliable and efficient home appliances, Maytag continues to deliver exceptional products that meet these demands.

Maytag W10240579B Venting REQUiREMENTS, Rigid metal vent, Exhaust hoods, Elbows, Clamps

Models: W10240579B W10240583B-SP