Maytag W10304917A Electronic Oven Control, Display, Oven Indicator Lights, Start, Cancel, Clock

ELECTRONIC OVEN CONTROL

A BC D E

F	G	H	I
A. Oven light		F. Timer
B. Clock		G. Bake
C. Display		H. Broil
D. Start (control lock)		I. Temp/time
E. Cancel

Display

When power is first supplied to the appliance, a flashing time will appear on the display. Press CANCEL to clear flashing time from the display.

If flashing time appears, a power failure has occurred. Press CANCEL and reset the Clock if needed.

When the oven is not in use, the display shows the time of day.

When performing a cook or timer function, the display will show either hours and minutes, or minutes and seconds.

Oven Indicator Lights

The indicator lights are located on both sides of the display. The indicator lights light up or flash when the oven is in one of the following modes: Bake, Broil or Kitchen Timer.

Start

The START pad begins any oven function. If the START pad is not pressed within 5 seconds after pressing a function pad, the Push to Start (“PSH”) indicator light will flash and the push to start tone will sound as a reminder.

If the START pad is not pressed within 1 minute after pressing a function pad, the oven display will return to the time of day mode and the programmed function will be canceled.

Cancel

The CANCEL pad stops any function except the Clock, Kitchen Timer and Control Lock.

Clock

This is a 12-hour clock and does not show a.m. or p.m.

To Set:

Before setting, make sure the oven and Kitchen Timer are off.

1.Press CLOCK.

2.Press the TEMP/TIME “+” or “-” pads to set the time of day.

3.Press CLOCK or START.

Tones

Tones are audible signals, indicating the following:

One tone

■Valid pad press

■Oven is preheated (long tone)

■Function has been entered

Three tones

■Invalid pad press

■Push to start reminder

Cycling tones

■End of cycle

Fahrenheit and Celsius

The temperature is preset at Fahrenheit, but can be changed to Celsius.

To Change: Press and hold BROIL for 5 seconds. A tone will sound, and “C” will appear on the display. Repeat to change back to Fahrenheit. To exit mode, press CANCEL.

Kitchen Timer

The timer can be set in hours or minutes up to 12 hours and

59 minutes, and counts down the set time either in hours and minutes, or in minutes and seconds. The timer does not start or stop the oven.

To Set:

1.Press KITCHEN TIMER. The timer indicator light will light up. If no action is taken after 1 minute, the display will return to the time of day, bake or broil mode.

2.Press the TEMP/TIME “+” or “-” pads to set the length of time.

3.Press START. When the set time ends, end-of-cycle tones will sound.

4.Press KITCHEN TIMER pad twice anytime to cancel the timer and reminder tones.

If the CANCEL pad is pressed, the oven will turn off and the cook function will be disabled.

To display the time of day for 5 seconds when the timer is counting down, press CLOCK pad.

If the START pad is not pressed within 5 seconds after pressing the KITCHEN TIMER pad or TEMP/TIME arrow pads, the “PSH” indicator light will flash and the push to start tone will sound as a reminder.

The timer can be reprogrammed to change the time while it is running.

To Reprogram:

1.Press KITCHEN TIMER.

2.Press TEMP/TIME “+” or “-” pads to adjust time.

3.Press START.

8