Electrical Requirements, Venting Requirements

ELECTRICAL REQUIREMENTS

To supply the required 3 or 4 wire, single phase, 120/240 volt, 60 Hz., AC only electrical supply (or 3 or 4 wire, 120/208 volt electrical supply, if specified on the serial/rating plate) on a separate 30-amp circuit, fused on both sides of the line. A time-delay fuse or circuit breaker is recommended. Connect to an individual branch circuit. Do not have a fuse in the neutral or grounding circuit.

VENTING REQUIREMENTS

Exhaust venting: Exhaust your dryer to the outside. 4" (102 mm) diameter vent is required. Rigid or flexible metal exhaust vent must be used. Do not use plastic or metal foil vet. Exhaust hood must be at least 12" (305 mm) from the ground or any object that may be in the path of the exhaust.

Exhaust hoods:

Recommended Styles:

The Vent System Chart provides venting requirements that will help achieve best drying performance.

Vent System Chart

Number of	Type	Box/louvered	Angled
90° elbows	of vent	hoods	hoods

0	Rigid metal	90 ft. (27.4 m)	80 ft. (24.4 m)

1	Rigid metal	80 ft. (24.4 m)	70 ft. (21.3 m)

2	Rigid metal	70 ft. (21.3 m)	60 ft. (18.3 m)

NOTE: Bottom exhaust installations have a 90º turn inside the

Louvered HoodBox Hooddryer. To determine maximum exhaust length, add one 90º turn to the chart.

Acceptable Style:

Angled Hood

Determine vent path:

■■ Select route that will provide straightest and most direct path outdoors.

■■ Plan installation to use fewest number of elbows and turns.

■■ When using elbows or making turns, allow as much room as possible.

■■ Bend vent gradually to avoid kinking. ■■ Use as few 90° turns as possible.

Determine vent length and elbows needed for best drying performance:

■■ Use following Vent System Chart to determine type of vent material and hood combinations acceptable to use.

NOTE: Do not use vent runs longer than those specified in Vent System Chart. Exhaust systems longer than those specified will:

■■ Shorten life of dryer.

■■ Reduce performance, resulting in longer drying times and increased energy usage.

Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation Instructions packed with product. Specifications subject to change without notice.

W10445417B specifications

The Maytag W10445417B is a standout appliance, known for its durability and efficiency. Designed to cater to the needs of modern households, this model incorporates advanced features and technologies that make it a reliable choice for any kitchen.

One of the main features of the Maytag W10445417B is its impressive capacity. With ample space, it allows users to store a significant amount of food, making meal preparation and storage more convenient than ever. This model is equipped with adjustable shelves, enabling homeowners to customize the interior layout according to their unique storage needs. This flexibility is essential for maximizing space, especially when dealing with various container sizes.

The Maytag W10445417B also boasts cutting-edge cooling technology. It includes a powerful compressor system that efficiently maintains optimal temperatures, ensuring your food stays fresh for longer periods. This is complemented by its frost-free operation, which eliminates the hassle of manual defrosting, saving time and effort.

Energy efficiency is another key characteristic of the Maytag W10445417B. It meets stringent energy standards, helping reduce electricity consumption and lowering utility bills. This feature not only contributes to environmental sustainability but also provides peace of mind to users who are conscious of their energy usage.

Additionally, the design of the Maytag W10445417B is both stylish and functional. The sleek exterior enhances the aesthetics of any kitchen, while the intuitive control panel offers ease of use. The LED lighting illuminates the interior, making it easy to find items, even in low-light conditions.

Durability is at the forefront of the Maytag brand, and the W10445417B is no exception. Constructed with high-quality materials, this model is built to withstand daily wear and tear. Its reliable performance is backed by a strong warranty, ensuring that users can trust their appliance for years to come.

In conclusion, the Maytag W10445417B is a well-rounded appliance, combining capacity, advanced cooling technology, energy efficiency, stylish design, and durability. It represents an excellent investment for any home, providing the functionality and reliability that today's consumers seek. With this model, Maytag continues to deliver quality and performance, making it a preferred choice for discerning homeowners.

Maytag W10445417B Electrical Requirements, Venting Requirements, Exhaust hoods Recommended Styles

Models: W10445417B