Do not use chainsaw above shoulder height

Choke partially opened

Choke closed (cold start)

Visual check

Switch off the engine by moving the stop switch to the STOP position before carrying out any checks or maintenance.

Brake engaged / disengaged

Beware of kickback

Regular cleaning is required

Do not cut with the end on the bar, this may cause kickback

Never use the machine with only one hand

Special Training is required to service and repair chain saws

Always use the machine with both hands

B. Safety precautions

1All operators should read this manual carefully before using this chainsaw; only use this machine for usage specifically mentioned in this manual.

Wear suitable clothing. This should include snugly-fitting (safety) clothing, sturdy boots, heavy duty gloves, goggles or a face screen and ear plugs or ear mufflers. Wear a hel- met if there is risk of falling objects or projections from trees.

2Always hold the chainsaw firmly with both hands when the engine is running. Always maintain a firm foothold. Ensure you are able to stop the engine quickly if neces- sary.Do not work up a tree unless you have received suit- able training and have the appropriate equipment (belts, ropes, safety hooks etc.) for this type of work.

We strongly recommend that all first-time chainsaw users obtain practical instruction on safe chainsaw usage before operating the chainsaw.

Do not operate this machine when tired or under the influ- ence of any substances, drugs or alcohol which can impair vision, dexterity or judgement.

Prolonged use of chainsaws or other machines exposing the operator to vibration may produce Whitefinger’s Disease (Raynaud’s Phenomenon). This may reduce the hands’ ability to feel and regulate temperature and may produce general numbness. Continual or regular users

ENGLISH - 2

should therefore monitor closely the condition of their hands or fingers. If any of the symptoms appear, seek immediate medical advice.

3 Never carry the chainsaw with the engine running. Whenever carrying a chainsaw, even for short distances, the chain should be covered by the chain guard (scab- bard) and the bar should point backwards.

When transporting the chainsaw in a vehicle, secure the saw to prevent fuel spillage.

4To avoid kick-back, do not attempt to cut with the nose of the bar. Ensure the engine is running at full throttle before commencing to cut. To avoid kick-back, do not let the nose of the bar come into contact with logs, branches, the ground or any other obstruction. Do not allow any part of the chain to come into contact with rock, nails or wire fence

Ensure the chain is kept sharp and correctly tensioned. Keep the spike or the saw body against the wood when cutting. Use only genuine accessories and spare parts. We recommend you have your unit periodically checked and serviced by an authorised dealer.