McCulloch 95390024200 Fuel MIX, Safety Guard Assembly, Blade and Nylon String Head Assembly

A	ALWAYS USE GENUINE ACCESSORIES AND	AND SPARE PARTS INCREASES THE RISK OF
	SPARE PARTS AVAILABLE FROM	ACCIDENTS AND IN SUCH A CASE THE
	AUTHORISED SERVICING DEALERS.	COMPANY IS NOT LIABLE FOR DAMAGE TO
	THE USE OF NON-ORIGINAL ACCESSORIES	PEOPLE AND/OR THINGS.

D.FUELMIX

Use only fuel recommended by this manual.

This product is fitted with a 2-stroke engine and therefore requires a 2-stroke petrol and oil mix. Use leaded (4 Star) or unleaded petrol with a minimum octane rating of 90.

Only use oil from sealed containers. In order to obtain a good fuel mix, put the oil into the container before the petrol.

The use of sub-standard petrol or oil may reduce performance or reduce the life of certain components.

Leaded Petrol

If using leaded petrol, the correct fuel mix is achieved by either using 5% (20:1) of a well known brand of 2-stroke engine oil, or else 2.5% (40:1) of special engine oil.

Unleaded Petrol

If using unleaded petrol, you must use a totally synthetic 2-stroke engine oil or branded 2-stroke engine oil. In either case use 2.5% (40:1) of oil.

IMPORTANT

Always shake the fuel mix container thoroughly before pouring any fuel mix.

Fuel mix properties may deteriorate with time and should be used up within 2 months.

We recommend that you prepare fuel mix according

to your immediate requirements only. Never use fuel mix more than 2 months old so as to avoid possible engine damage.

WARNING

Do not smoke when re-fuelling.

Always open the fuel cap slowly, to release any pressure build up in the tank.

Re-fuel in open spaces only, keeping away from naked flames or sparks.

Safe Storage of Fuel

Petrol fuel mix is highly inflammable. Put out all cigarettes, pipes and cigars before working with fuel. Avoid spilling fuel.

Store fuel in a cool, well ventilated place, in an approved container specifically designed for the purpose. Never store engine with fuel in the tank in enclosed, poorly ventilated areas, where fuel fumes may reach an open flame, spark or pilot light such as in a furnace, water heater, clothes dryer etc.

Petrol fumes can cause an explosion or a fire. Never store large amounts of fuel.

To prevent possible restarting problems avoid running the fuel tank dry. This also helps to extend engine life.

E.SAFETYGUARDASSEMBLY

In the interest of safety, it is imperative that the unit is used with the correct guard which is delivered as standard with the unit.

Only use blades or nylon string heads clearly marked with a MAXIMUM R.P.M. SPEED of at

least 10,500 min-1.

Assemble the guard for nylon string head as illustrated. Tighten the attachment bolts (V). Line cutter blade (L): assemble as illustrated.

F.BLADEANDNYLONSTRINGHEADASSEMBLY

Always ensure the correct guard is assembled to suit the kind of blade or nylon string head to be used as well as the direction of rotation marked on the shaft or on the guard itself.

(See section: SAFETY GUARD ASSEMBLY).

1) Assemble the nylon string head as illustrated: a) Upper cap - b) Nylon string head. Tighten clockwise.

2) Assemble metal blade as illustrated: a) Upper cap with blade centering - b) Metal blade with text facing downwards- c) Blade flange - d)

Fixed Mower gauge - e) Blade locking nut - f) Safety split pin.

3) While tightening the blade assembly can be held fast by inserting a wrench or the screw- driver supplied into the cap and gearcase holes; to do this, rotate the cap until the two holes align.

NB. Only use blades or nylon string heads marked with a maximum speed of at least 10.500 min-1.

For instructions to replace the nylon string please refer to illustrations N1-5 in the front of this manual.

8