tree and the angle of the upper and lower cuts should be at least 45°.

Main cut

The main cut is made on the opposite side from the directional cut and must be perfectly horizontal, and at a height about 3 cm above the base of the directional cut (see illustration)

Finish the cut at least 1/10 of the tree diameter from the directional notch. This is called the breakage line and serves to control the direction of fall of the tree because the tree will now start to fall. This can be facilitated using a crowbar on the main cut. Caution! If the breakage line is too small or is cut diagonally it will no longer be possible to control the direction of fall of the tree.

F. Sharpening the bar and chain, and maintenance of the bar

•Important: unplug the chainsaw before performing any cleaning and maintenance of the tool.

•Always wear approved work gloves

•Fig. B6 make sure the chain is tight enough to prevent it from moving during sharpening

•Fig. F1 pull the brake lever forward to block the chain on the bar

•The correct diameter of the file is 1/10 or more than the height of the cutting tooth.

•FIG. F2 Round file for sharpening 4 mm chain

•FIG. F3 File at a horizontal angle of 35° to the bar from the inside of the tooth toward the outside. First file all the teeth on one side then turn the chainsaw and file the teeth on the other side

•File in such a way that all the teeth are the same length.

•When only 3 mm (1/8”) of the length of the cutting teeth remains, replace the chain.

•FIG F4 file perpendicular to the bar plane (90°)

•FIG F5 About every 5 sharpenings, check the cutting height against the cutting depth limiter (H). To reduce the height of the limiter use a caliber.

•FIG F6 Every 3 hours of work remove the bar and clean the groove, make sure the oil outlet hole is not obstructed by chips and remove all sawdust deposits from the tool.

Important: reverse the direction of installation of the bar every time you clean it so as to obtain uniform wear

•FIG F7 Check frequently that the ventilation slots on the motor are free and the grating is clean.

Electric safety

Voltage

Make sure the voltage rating of your mains complies with the rating of the chainsaw as shown on the plate on the motor casing.

Current

Your tool works only with AC power.

Plugs and extension cables

Use only approved insulated outlets, cables and plugs in PVC, comply strictly with the safety regulations in effect in your country. The tool has to be plugged into a power socket and not a light socket.

Disposal of obsolete products

When you decide to replace the product, or no longer need it, think of the environment. Your local distributor will take your old product back and

dispose of it in a way that is safe for the environment.

ENGLISH - 4

Page 10 Page 12
Page 11
Image 11
McCulloch 95390053200 manual Electric safety, Disposal of obsolete products, Main cut
Page 10 Page 12

95390053200 specifications

The McCulloch 95390053200 is a powerful and versatile string trimmer designed for both amateur gardeners and professional landscapers. This model stands out for its robust performance and user-friendly features, making it an ideal choice for tackling tough yard work.

One of the notable features of the McCulloch 95390053200 is its efficient engine. Equipped with a reliable 25cc 2-cycle engine, it delivers ample power, allowing users to cut through thick grass and weeds with ease. This engine is designed to provide a balance of performance and fuel efficiency, ensuring that users can work longer without frequent fuel refills. The lightweight design of the trimmer makes it easy to maneuver, reducing fatigue during extended use.

The dual-line cutting system is another defining characteristic of the McCulloch 95390053200. With a cutting width of 16 inches, this trimmer can cover more ground in less time, making it a time-saving tool for any landscaping project. The automatic line feed feature allows for continuous operation without interruptions, as it advances the line when needed without the user having to stop and adjust it manually.

User comfort and ease of operation are prioritized in the design of this trimmer. The handle is ergonomically designed, providing a comfortable grip that reduces strain on the hands during usage. Additionally, the adjustable shaft can be elongated or shortened to accommodate the user's height, ensuring that operators of all statures can use the trimmer with ease.

McCulloch’s innovative Smart Start technology simplifies the starting process, reducing the effort needed to start the engine. This feature, combined with an anti-vibration system, provides a smoother experience, minimizing vibrations that can cause discomfort during prolonged use.

Durability is another compelling aspect of the McCulloch 95390053200. Built with high-quality materials, this trimmer is designed to withstand the wear and tear of regular use, ensuring longevity and reliability. Maintenance is straightforward, with easily accessible components for quick repairs or replacements when necessary.

In summary, the McCulloch 95390053200 is a formidable string trimmer that combines power, efficiency, and user comfort. With its strong 25cc engine, dual-line cutting system, ergonomic design, and advanced technologies, it offers an exceptional solution for maintaining a pristine yard. Whether for home use or professional landscaping, this trimmer is well-equipped to handle a variety of cutting tasks with ease.
Top Page Image Contents