SERVICE AND ADJUSTMENTS

TRANSAXLE MOTION CONTROL LEVER NEUTRAL ADJUSTMENT (See Fig. 35)

The motion control lever has been preset at the factory and adjustment should not be necessary.

•Loosen adjustment bolt in front of the right rear wheel, and lightly tighten.

•Start engine and move motion control lever until tractor does not move forward or backward.

•Hold motion control lever in that position and turn engine off.

•While holding motion control lever in place, loosen the adjustment bolt.

•Move motion control lever to the neutral (lock gate) position.

•Tighten adjustment bolt securely.

NOTE: If additional clearance is needed to get to adjustment bolt, move mower deck height to the lowest position.

After above adjustment is made, if the tractor still creeps forward or backward while motion control lever is in neutral position, follow these steps:

•Loosen the adjustment bolt.

•Move the motion control lever 1/4 to 1/2" in the direc- tion it is trying to creep.

•Tighten adjustment bolt securely.

•Start engine and test.

•If tractor still creeps, repeat above steps until satisfied.

RETAINING WASHERS

RING

AXLE

COVER

SQUARE KEY

(REAR WHEEL ONLY)

Fig. 36

•On rear wheels only: align grooves in rear wheel hub and axle. Insert square key.

•Replace washers and snap retaining ring securely in axle groove.

•Replace axle cover.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

TO START ENGINE WITH A WEAK BATTERY (See Fig. 37)

WARNING: Lead-acid batteries gen- erate explosive gases. Keep sparks, flame and smoking materials away from batteries. Always wear eye protection when around batteries.

MOTION CONTROL LEVER

NEUTRAL

 

LOCK GATE

 

ADJUSTMENT

 

BOLT

Fig. 35

TO ADJUST STEERING WHEEL ALIGNMENT

If steering wheel crossbars are not horizontal (left to right) when wheels are positioned straight forward, remove steer- ing wheel and reassemble per instructions in the Assembly section of this manual.

FRONT WHEEL TOE-IN/CAMBER

The front wheel toe-in and camber are not adjustable on your tractor. If damage has occurred to affect the front wheel toe-in or camber, contact your nearest authorized service center/department.

TO REMOVE WHEEL FOR REPAIRS (See Fig. 36)

•Block up axle securely.

•Remove axle cover, retaining ring and washers to allow wheel removal (rear wheel contains a square key - Do not lose).

•Repair tire and reassemble.

22

If your battery is too weak to start the engine, it should be recharged. (See "BATTERY" in the Maintenance section of this manual).

If “jumper cables” are used for emergency starting, follow this procedure:

IMPORTANT: YOUR TRACTOR IS EQUIPPED WITH A 12 VOLT SYSTEM. THE OTHER VEHICLE MUST ALSO BE A 12 VOLT SYSTEM. DO NOT USE YOUR TRACTOR BATTERY TO START OTHER VEHICLES.

TO ATTACH JUMPER CABLES -

•Connect one end of the RED cable to the POSITIVE

(+)terminal of each battery(A-B), taking care not to short against tractor chassis.

•Connect one end of the BLACK cable to the NEGATIVE (-) terminal (C) of fully charged battery.

•Connect the other end of the BLACK cable (D) to good chassis ground, away from fuel tank and battery.

TO REMOVE CABLES, REVERSE ORDER -

•BLACK cable first from chassis and then from the fully charged battery.

•RED cable last from both batteries.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

WEAK OR

FULLY CHARGED

DEAD BATTERY

BATTERY

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Fig. 37

Page 21 Page 23
Page 22
Image 22
McCulloch 96041018000 manual Transaxle Motion Control Lever Neutral Adjustment See Fig, To Adjust Steering Wheel Alignment
Page 21 Page 23

96041018000 specifications

The McCulloch 96041018000 is a powerful chainsaw designed for both professional use and homeowners seeking efficient tree maintenance solutions. Renowned for its reliability and performance, this model blends rugged construction with innovative technology, catering to a variety of cutting tasks.

One of the standout features of the McCulloch 96041018000 is its robust engine. Equipped with a potent 60cc two-stroke engine, this chainsaw delivers impressive cutting power, allowing users to tackle larger branches and trees with ease. This engine ensures high performance while maintaining relatively low emissions, complying with modern environmental standards.

The chainsaw sports a long-lasting 18-inch guide bar which strikes an excellent balance between optimal cutting capacity and maneuverability. This length is ideal for felling medium to large trees and making precise cuts. In addition, the chain is designed for fast cutting with minimal kickback thanks to its low-vibration technology, which enhances user safety and comfort during prolonged use.

User convenience is a central theme in the design of the McCulloch 96041018000. The chainsaw features an easy-to-access air filter, allowing for quick maintenance and improved airflow, enhancing engine performance over time. The automatic oiling system guarantees that the chain is consistently lubricated, reducing wear and prolonging the lifespan of both the chain and the bar.

Another key characteristic is the chainsaw's ergonomic design. It includes a soft-grip handle and an anti-vibration system, which minimizes fatigue during operation. This thoughtful design makes it easier for users to maintain control and precision when cutting, ultimately leading to better results.

Safety features are integral to the McCulloch 96041018000. It includes a chain brake that stops the chain instantly in the event of kickback, ensuring the user's safety, while the handguard protects against flying debris.

In summary, the McCulloch 96041018000 is a well-rounded chainsaw built for reliability and performance. With its powerful engine, optimal balance, user-friendly features, and enhanced safety systems, it stands as an excellent choice for anyone in need of a dependable cutting tool. Whether for professional landscaping or home maintenance, this chainsaw is poised to meet a variety of demands with ease.
Top Page Image Contents