TROUBLESHOOTING POINTS

 

PROBLEM

CAUSE

CORRECTION

 

Engine continues

1.

Faulty operator-safety presence control

1.

Check wiring, switches and connections. If not

 

to run when oper-

 

system.

 

corrected, contact an authorized service center/

 

ator leaves seat

 

 

 

department.

 

 

 

 

 

 

 

with attachment

 

 

 

 

 

 

clutch engaged

 

 

 

 

 

 

 

 

 

 

 

 

 

Poor cut - uneven

1.

Worn, bent or loose blade.

1.

Replace blade. Tighten blade bolt.

 

 

 

2.

Mower deck not level.

2.

Level mower deck.

 

 

3.

Buildup of grass, leaves, trash under mower.

3.

Clean underside of mower housing.

 

 

4.

Bent blade mandrel.

4.

Replace blade mandrel.

 

 

5.

Clogged mower deck vent holes from

5.

Clean around mandrels to open vent holes.

 

 

 

buildup of grass, leaves, and trash around

 

 

 

 

 

 

mandrels.

 

 

 

 

Mower blades will

1.

Obstruction in clutch mechanism.

1.

Remove obstruction.

 

 

not rotate

2.

Worn/damaged mower drive belt.

2.

Replace mower drive belt.

 

 

3.

Frozen idler pulley.

3.

Replace idler pulley.

 

 

4.

Frozen blade mandrel.

4.

Replace blade mandrel.

 

 

 

 

 

 

 

 

Poor grass

1.

Engine speed too slow.

1.

Place throttle control in “FAST” position.

 

 

discharge

2.

Travel speed too fast.

2.

Shift to slower speed.

 

 

3.

Wet grass.

3.

Allow grass to dry before mowing.

 

 

4.

Mower deck not level.

4.

Level mower deck.

 

 

5.

Low/uneven tire air pressure.

5.

Check tires for proper air pressure.

 

 

6.

Worn, bent or loose blade.

6.

Replace blade. Tighten blade bolt.

 

 

7.

Buildup of grass, leaves, trash under mower.

7.

Clean underside of mower housing.

 

 

8.

Mower drive belt worn.

8.

Replace mower drive belt.

 

 

9.

Blades improperly installed.

9.

Reinstall blades sharp edge down.

 

 

10.

Improper blades used.

10.

Replace with blades listed in parts manual.

 

 

11.

Clogged mower deck vent holes from buildup

11.

Clean around mandrels to open vent holes.

 

 

 

of grass, leaves, trash around mandrels.

 

 

 

 

Headlight(s) not

1.

Switch is “OFF”.

1.

Turn switch “ON”.

 

 

working

2.

Bulb(s) or lamp(s) burned out.

2.

Replace bulb(s) or lamp(s).

 

(if so equipped)

3.

Faulty light switch.

3.

Check/replace light switch.

 

 

4.

Loose or damaged wiring.

4.

Check wiring and connections.

 

 

5.

Blown fuse.

5.

Replace fuse.

 

 

 

 

 

 

 

 

Battery will not

1.

Bad battery cell(s).

1.

Replace battery.

 

 

charge

2.

Poor cable connections.

2.

Check/clean all connections.

 

 

3.

Faulty regulator (if so equipped).

3.

Replace regulator.

 

 

4.

Faulty alternator.

4.

Replace alternator.

 

 

 

 

 

 

 

 

Loss of drive

1.

Freewheel control in “disengaged” position.

1.

Place freewheel control in “engaged” position.

 

 

2.

Debris on steering plate (if equipped).

2.

See "CLEANING" in the maintenance section.

 

 

3.

Motion drive belt worn, damaged, or broken.

3.

Replace motion drive belt.

 

 

4.

Air trapped in transmission during

4.

Purge transmission.

 

 

 

shipment or servicing.

 

 

 

 

 

5.

Axle key missing.

5.

Install axle key at rear wheel. See "TO REMOVE

 

 

 

 

 

WHEEL" in the Service and Adjustments section.

 

 

 

 

 

 

 

 

Engine "back-

1.

Engine throttle control not set between

1.

Move throttle control between half and full speed

 

 

fires” when turn-

 

half and full speed (fast) position before

 

(fast) position before stopping engine.

 

 

stopping engine.

 

 

 

 

ing engine “OFF”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Engine dies when

1.

Reverse operation system (ROS) is not "ON"

1.

Turn ignition key to ROS "ON" position. See

 

 

tractor is shifted

 

while mower or other attachment is engaged.

 

Operation section.

 

into reverse

 

 

 

 

 

26

Page 25 Page 27
Page 26
Image 26
McCulloch 532 43 25-35, 96042011400, MC195H42LT manual Troubleshooting Points
Page 25 Page 27

532 43 25-35, 96042011400, MC195H42LT specifications

The McCulloch MC195H42LT is a versatile lawn tractor designed for homeowners looking for a reliable and efficient machine to maintain their lawns. This tractor is particularly noteworthy for its blend of power, precision, and user-friendly features, making it a great choice for both novice and experienced users.

One of the standout features of the MC195H42LT is its powerful engine. It is equipped with a robust 532cc engine that provides ample power for tackling various lawn care tasks. The engine operates smoothly and starts easily, ensuring that users can get to work without hassle. The mowing deck, measuring 42 inches, is designed for efficient cutting, allowing for faster mowing times while delivering a clean and precise cut.

In terms of technology, the McCulloch MC195H42LT includes a hydrostatic transmission system. This system allows for seamless speed adjustments without the need for manual gear shifting. The result is a smooth driving experience and improved maneuverability on different terrains. Additionally, the tractor features a turning radius that makes it easy to navigate around trees, flower beds, and other obstacles in the yard.

The comfort of the operator is also a priority in the design of the MC195H42LT. It comes with an adjustable seat, ensuring that users of varying heights can find a comfortable driving position. This is complemented by easy-to-access controls that allow for effortless operation of the tractor's functions, such as cutting height adjustments.

Another important characteristic is its ease of maintenance. The design of the lawn tractor includes features that simplify routine care, enabling users to spend more time mowing and less time on upkeep. For those looking to enhance their lawn care experience, there are additional accessories available, such as towing carts and mulching kits.

Overall, the McCulloch MC195H42LT is a well-rounded lawn tractor that offers a powerful engine, user-friendly technology, and comfort for the operator. Its design effectively meets the demands of homeowners seeking an efficient and reliable machine for maintaining their lawns while also providing options for customization and enhanced functionality.
Top Page Image Contents