ASSEMBLY
SEAT
SEAT PAN
SHOULDER
BOLT
FLAT WASHER
LOCK WASHER
ADJUSTMENT |
|
BOLT | 02465 |
|
FIG. 2
HOW TO SET UP YOUR TRACTOR
CONNECT BATTERY (See Figs. 3 and 4)
CAUTION: Do not short battery termi- nals by allowing a wrench or any other object to contact both terminals at the same time. Before connecting battery, remove metal bracelets, wristwatch bands, rings, etc.
Positive terminal must be connected first to prevent sparking from accidental grounding.
•Lift seat pan to raised position.
•Remove terminal protective caps and discard.
•If this battery is put into service after month and year indicated on label (label located between terminals) charge battery for minimum of one hour at
•First connect RED battery cable to positive (+) terminal with hex bolt and keps nut as shown. Tighten securely. Slide terminal cover over terminal.
•Connect BLACK grounding cable to negative
| DISCARD TERMINAL |
| PROTECTIVE CAPS |
TERMINAL | KEPS |
NUT | |
COVER | HEX BOLT |
02604 |
|
POSITIVE (RED) | NEGATIVE (BLACK) |
CABLE | CABLE |
| FIG. 3 |
SEAT PAN |
|
| LABEL |
02602
FIG. 4
7
