Meade 114EQ-AR instruction manual Inset a

Meade114EQAR 3/28/07 9:52 AM Page 4

		FIGURE 1		Figure 1: Meade 114EQ-AR Equatorial Reflecting Telescope
2				Inset A:	Accessory Tray
				Inset B:	Red Dot Viewfinder Assembly.
				Inset C:	Tripod Leg
1.	Tripod legs
			26.	Eyepiece holder slots (see Inset A)
2.	Equatorial Mount		27.	Right Ascension setting circle
3.	Right ascension control cable		28.	Declination setting circle (see Fig. 5)
4.	Declination control cable		29.	Latitude dial (see Fig. 5)
5.	Counterweights		30.	Azimuth adjustment lock
6.	Counterweight shaft		31.	Focus knobs
7.	Counterweight lock knobs		32.	Optional motor drive gear
8.	Counterweight safety washer			(see Fig. 5)
9.	Latitude adjustment lock		33.	Azimuth base (see Fig. 5)
10.	Polar axis (see Fig. 5)		34.	Red dot viewfinder alignment
11.	Latitude adjustment knob			screws (see Inset B)
12.	Main optical tube (OTA)		35.	Azimuth circle (see Fig. 5)
13.	Optical tube saddle plate (see Fig. 5)		36.	Cradle ring attachment lock-
14.	Cradle rings			knob (see Fig. 6)
15.	Cradle ring lock knobs		37.	Cradle ring attachment
16.	Red dot viewfinder bracket mounting		38.	Tripod leg Phillips-head fastener
	thumbscrews (see Inset B)			screws (see Fig. 5)
17.	Focuser		39.	Tripod-to-mount wingnuts
18.	Focuser thumbscrew		40.	Accessory tray (see Inset A)
19.	Eyepiece		41.	Leg brace support (see Inset A)
20.	Red dot viewfinder bracket		42.	Sliding leg extension lock
	(see Inset B)			(see Inset C)
21.	Declination axis (see Fig. 5)		43.	Sliding leg extension
22.	Right Ascension lock (see Fig. 5)			(see Inset C)
23.	Declination lock (see Fig. 5)
24.	Red dot viewfinder
25.	Telescope front dust cover

Inset A

Inset B

Inset C