Meade CV-4 8 x 30 manual Seal Your Camera, Insert Batteries

Seal Your Camera

CV-4 is waterproof and seals in the electronics, batteries, memory card and USB port. However, this means that you will need to install the batteries and SD or MMC card, and carefully seal the compartment to ensure waterproofing.

If you want to...

Insert Batteries,

Install SD or MMC Card and Seal waterproof compartment

Note: If you do not press any of the buttons, the camera will automatically shut off after 10 minutes.

Do this...

1.To open the battery compartment: Press the tab down and push the battery compartment lid forward to open.

2.Insert 2 AAA 1.5v (user-supplied) batteries into the compartment, noting the correct polarity as illustrated inside the compartment.

3.To load or eject a SD/MMC memory card: Press the card in topside up, and release when you hear a click.

4.To seal the compartment, close the lid and slide the tab up. The tab must be in the up position for the compartment to be waterproofed.

Slide tab

12