Step 8) Attach Front Panel:
Remove the M6 nut used to attach the upper and lower leg sections. Place the large eyelet over the bolt and replace the nut. (FIG. 8B) Using the ST4.0 Screw, secure the Fabric Panel to holes in the lower legs over the eyelets. (FIG. 8A)
(21)SCREW, ST4.0 x 10 4 PC
FIG. 8B
(37) FABRIC PANEL
RIGHT SIDE
(21) SCREW, ST4.0 x 10
FIG. 8A
Step 9) Install Flame Diffuser:
Place the Flame Diffuser over the Main Bowl Burner, onto the two mounting studs on each side of the Bowl. (FIG. 9)
(35) FLAME DIFFUSER
Flame Diffuser mounting stud in Bowl.
(35) Flame Diffuser
FIG. 9
Step 10) Install Cooking Grid:
(Note Warming Rack already installed.)
Lay Cooking Grid onto the Bowl ridges over the Flame Diffuser and Main Burner. (FIG. 10)
(34) COOKING GRID
1 PC
(34) COOKING GRID
FIG. 10
10
