UK
Congratulation with your new Drinks mixer please read all instructions before you start using your new Drinks mixer. We recommend that you save this instruction manual for later use.
IMPORTANT SAFEGUARDS:
When using electric appliances, basic safety precautions should always be followed including the following:
-Read all instructions before use.
-To protect against risk of electrical shock, do not put cord, plugs, or the main body in water or other liquids.
-Close supervision is needed when this appliance is used by or near children.
-Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.
-Avoid contacting moving parts.
-Do not use outdoors.
-Do not let cord hang over edge of table or counter.
-Keep hands and utensils out of the cup to reduce the risk of injury to person or damage to the mixer.
This appliance is designed for short time operation. After 4 minutes continuous use, allow a few minutes rest before next use to avoid overheating.
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similar qualified person in order to avoid a hazard.
MAIN COMPONENTS:
HOW TO USE:
-Before the first use, wash all parts except base in warm, soapy water. Rinse and dry. Never immerse the base assembly in water; it can only be wiped with wet cloth.
-If the cup is leaking, return the Drinks mixer to the shop.
-Plug the cord into a 230
-With the cup placed on a bench or flat surface, place ingredients into the stainless steel mixing cup.
Note:
We recommend that you do not fill liquid beyond the top fill mark on the side of the cup- 380 ml. This will help prevent the mixture from splashing out during mixing. The volume of the milk shake will increase, which makes the 850 ml milk shake cup ideal for the frothiest shakes.
Attach the stainless steel mixing cup to the drink mixer by sliding the lip of the of the mixing cup under the cup holder and setting the bottom edge of the mixing cup un the cup rest.
Note:
The drinks mixer will only operate when the stainless steel mixing cup is in place.
-Turn the dial to mix at the speed you want:
1:low speed
2:high speed
0:stop
-The Drinks mixer has a safety switch, which will stop the machine if the cup is not in proper position.
Hints before starting the mixer
-Always be sure that the mixer is in the "0" position before plugging in the mixer and before removing the mixing cup.
-Add wet ingredients before dry ingredients for the best mixing result.
-The mixing time of beverages containing ice cream type ingredients will vary according to the hardness of the ingredients.
-If your recipe call for ice, use only crushed ice in the drink mixer.
-Do not mix hot ingredients with your drinks mixer.
-Only use the drink mixer with the stainless cup attached.
10
