UK
INTRODUCTION
To get the best out of your new appliance, please read this user guide carefully before using it for the first time. Take particular note of the safety precautions. We also recommend that you keep the instructions for future reference, so that you can remind yourself of the functions of your appliance.
SAFETY MEASURES
General
•Incorrect use of this appliance may cause personal injury and damage.
•Use for its intended purpose only. The manufacturer is not responsible for any injury or damage resulting from incorrect use or handling (see also Guarantee Terms).
•For domestic use only. Not for outdoor or commercial use.
•For connection to 230 V, 50 Hz only.
•Do not immerse the motor section, cord or plug in water or any other liquid. Make sure that no liquid gets into the motor section.
•Never touch the appliance, cord or plug with wet or damp hands.
•Keep the appliance under constant supervision while in use. Keep an eye on children.
•The appliance contains sharp parts - keep out of the reach of children.
•Use only accessories supplied with the appliance or those recommended by the manufacturer.
Use
•Always place the appliance on a dry, level and firm surface well away from any edges.
•The appliance should only be switched on when the blender glass with lid has been attached and contains liquid and/or food.
•Do not leave the appliance running non stop for more than 1 minute at a time. If the appliance has been running for 1 minute, allow it to cool down for 1 minute before you use it again.
•Never pour boiling liquid or very hot food into the blender glass. Make sure that the food has a sufficiently low temperature to avoid burning/ scalding in case of skin contact.
•Never add liquid or food above the “1,500 ml” mark on the blender glass.
•Do not use the appliance if the blender glass is cracked or damaged in any way.
•Never put tools or your hands into the blender glass while the appliance is switched on. Please note that the blade may still rotate for a while after you switch off the appliance.
•Be careful not to touch the sharp edges of the blades during use and cleaning!
ord and plug
•Do not let the cord hang out over the edge of the work surface.
•Check that it is not possible to pull or trip over the cord or any extension cord.
•Keep the cord and appliance away from heat sources, hot objects and naked flames.
•Remove the plug from the socket before removing the lid from the appliance, before cleaning, or when the appliance is not in use. Avoid pulling the cord when removing the plug from the socket. Instead, hold the plug.
•Ensure that the cord is fully extended.
•The cord must not be twisted or wound around the appliance.
•Check regularly that neither cord nor plug is damaged and do not use if they are, or if the appliance has been dropped or damaged in any other way.
•If the appliance, cord or plug has been damaged, have them inspected and if necessary repaired by an authorised repair engineer. Never try to repair the appliance yourself. Please contact the store where you bought the appliance for repairs under guarantee. Unauthorised repairs or modifications to the appliance will invalidate the guarantee.
KEY TO MAIN COMPONENTS OF THE APPLIANCE
1.Blender glass with scale
2.Blade
3.Motor section
4.On/Off button
5.Cap
6.Blender glass lid
7.Pulp filter
8.Pouring spout
PRIOR TO FIRST USE
•Before using for the first time, or after prolonged storage without use, wash any parts that will come into contact with food.
•Spare cord can be wrapped around the cord storage holders at the bottom of the appliance.
14
