Melissa 635-103 manual Introduction, Safety Measures, Key, Prior to First USE, Use, Cleaning

UK

INTRODUCTION:

To get the best out of your new hairdryer, please read through these instructions carefully before using it for the first time. We also recommend that you keep the instructions for future reference, so that you can remind yourself of the functions of your hairdryer.

SAFETY MEASURES

Normal use of the hairdryer

•Incorrect use of the hairdryer may cause personal injury and damage to the appliance.

•Use the hairdryer for its intended purpose only. The manufacturer is not responsible for any damage resulting from incorrect use or handling (see also Guarantee Terms).

•The hairdryer may only be connected to 230 V, 50 Hz.

•The hairdryer or cord must not be placed in water or any other liquid.

•Never leave the hairdryer unattended when in use. Children may only use the hairdryer under the supervision of an adult.

•This hairdryer is not suitable for commercial or outdoor use.

•When in use, the air intake on the back of the hairdryer must not be blocked. If the intake is blocked, the hairdryer will overheat. If this happens, the overheat protection will automatically shut off the power to the hairdryer. Turn off the hairdryer, and remove the plug from the wall socket.

•You should not leave the hairdryer on clothes, bedding, etc. manufactured from synthetic materials and thus very susceptible to heat and easily combustible while it is switched on or still warm.

•In order to avoid burns, you should avoid blowing hot air directly into the eyes or on very sensitive skin.

Cord, plug and mains socket

•Check regularly that the cord and plug are not damaged and do not use the hairdryer if it is, or if it has been dropped or damaged in any other way.

•If the hairdryer, cord or plug is damaged, the appliance must be inspected and, if necessary, repaired by an authorised repair engineer, otherwise there is a risk of electric shock. Never try to repair the appliance yourself.

•Remove the plug from the socket for cleaning.

•Avoid pulling the cord when removing the plug from the socket. Instead, hold the plug.

•The cord must not be wound around the appliance.

KEY

1.Speed selector

2.Detachable air concentrator

3.Cool shot button

4.Hanging loop

PRIOR TO FIRST USE

Check that you have removed all packaging from your hairdryer.

USE

•The first time the hairdryer is used, it may give off a small amount of smoke. This is because an extra layer of protective oil on the heating element is being heated up. This is quite normal and not dangerous, and will disappear after a short period of use.

•To switch on the hairdryer, set the speed selector (1) to one of the three positions above 0. In the top two positions, the hairdryer operates with full air flow, while in the first position it operates with reduced air flow.

•The detachable air concentrator (2) provides concentrated air supply.

•If you hold the cool shot button (3) in, the hairdryer gives out cool air. This is useful when your hair is dry and needs to be set.

•To switch off the hairdryer, set the speed

selector to position 0. The hairdryer can be hung up using the hanging loop (4) at the bottom of the handle.

Please note: At low blower speed it is not possible to alter the temperature.

CLEANING

•Remove the plug from the socket for cleaning.

•Clean the hairdryer with a well-wrung damp cloth and a little washing-up liquid, if required. Wipe off with a dry cloth.

•Occasionally remove any dust or hair from the air intake using a brush.

10