5.Brush the filter with a small brush or wash it in lukewarm water without any detergent or similar.
6.Allow the filter to dry completely, replace it on the upper section by turning it clockwise, refit the upper section on the lower section, and insert the dust container back into the vacuum cleaner. Press down until you hear a click.
CLEANING
•Clean the vacuum cleaner by wiping it with a damp cloth.
•You must not use any form of solvent, or strong or abrasive cleaning agent.
•Make sure all filters are kept clean (see above). Replace the filters once they become worn or can no longer be cleaned.
Motor protection filter
The motor protection filter is the detachable filter pad located beside the dust container. It should be removed from time to time and, after brushing off any dust, cleaned using water and a small amount of mild detergent. Allow the filter to
dry completely and replace it.
Exhaust filter
This exhaust filter should also be cleaned regularly to maintain suction power. Press the release button on the filter holder on the back of the vacuum cleaner. Remove the filter and clean it, or replace the filter. If you use water to clean the filter, it
must be completely dry before being replaced in the vacuum cleaner.
TRANSPORT AND STORAGE
•You can lift and carry the vacuum cleaner using the carrying handle (10). Never pull or lift the vacuum cleaner by the cord.
•Before putting the vacuum cleaner away, rewind the cord. Switch off at the socket, unplug, and press the automatic cord rewind button (11) until the cord is fully rewound.
•To save space, the vacuum cleaner can be stored upright on its end cover.
ENVIRONMENTAL TIPS
When electronic products no longer work, they should be disposed of in a manner that causes least impact on the environment and in accordance with any local legislation. In most cases you can take such products to your local recycling station.
GUARANTEE TERMS
The guarantee does not apply:
•if the above instructions are not followed
•if the appliance has been interfered with
•if the appliance has been mishandled, subjected to rough treatment, or has suffered any other form of damage
•if faults have arisen as a result of faults in your electricity supply.
Due to the constant development of our products in terms of function and design, we reserve the right to make changes to the product without prior warning.
IMPORTER
Adexi Group
We cannot be held responsible for any printing errors.
21