Auto shut-off
To increase safety, the steam iron is equipped with an auto
Once auto
•Lift or move the iron to deactivate the auto
•The indicator light goes out, and the thermostat light begins to glow.
•Continue ironing once the thermostat light goes out again.
CLEANING
The steam iron has an automatic cleaning function, and we recommend cleaning the iron thoroughly once every 14 days (possibly more frequently if using very hard water) as follows:
•Set the temperature control dial to MIN position.
•Remove the plug from the socket.
•Fill the water reservoir right up to MAX (300 ml – see ‘Filling with water’), and close the water reservoir cover.
•Set the temperature control dial to position •••, plug the iron in and switch on the power.
•Wait until the thermostat light goes out. Hold the steam iron horizontal over a sink, and turn the steam setting selection knob to the cleaning setting and pull it up.
•Hot water and steam will now run out of the holes in the soleplate, and any calcium deposits and impurities will be washed out. Shake the steam iron gently from side to side until the water reservoir is empty.
•Repeat the cleaning procedure if large quantities of calcium deposits were washed out of the iron.
•Replace the knob with the valve, and turn the steam setting selection knob to position b (no steam), and the thermostat button to MIN.
•Remove the plug from the socket.
• Place the steam iron on top of an old tea towel or similar to dry before putting it away.
The handle (7) and water reservoir can be wiped over with a damp cloth and, if necessary, a little detergent.
Never use a scouring sponge or abrasive cleaning agents for cleaning the soleplate.
The spray nozzle can be cleaned, if necessary, using a special needle.
ENVIRONMENTAL TIPS
Once any electrical product is no longer functional, it should be disposed of
in such a way as to cause minimum environmental impact, in accordance with the regulations of your local authority. In most cases you can take such products to your local recycling station.
THE GUARANTEE DOES NOT APPLY
-If the instructions given above are not observed.
-If the device has been mishandled, subjected to rough treatment or has suffered any other form of damage.
-If the appliance has been subject to unauthorised repairs.
Due to the constant development of our products in terms of function and design, we reserve the right to make changes to the product without prior warning.
IMPORTER
Adexi Group
We cannot be held responsible for any printing errors.
16
