Melissa 645-075 manual Prior To First Use, Setting The Clock, Using The Timer Function

Models: 645-075

1 31
Download 31 pages 6.82 Kb
Page 15
Image 15
PRIOR TO FIRST USE

Check that it is not possible to pull or trip over the coffee maker cord or any extension cord.

KEY

1.

3.

SETTING THE CLOCK 2.

USING THE TIMER FUNCTION 5.

4.

6.

1.Water reservoir cover

2.Water reservoir with water level gauge

3.Filter funnel

4.Glass pot

5.Control panel

6.Hotplate

PRIOR TO FIRST USE

Read the safety instructions through carefully.

Unroll the coffee maker cord fully before using it.

To rinse out the inside of the coffee maker, fill the reservoir with water and run it through the machine before using it to make coffee.

SETTING THE CLOCK

Switch the coffee maker on at the socket. The time 12:00 will flash in the display on the control panel (5).

Press the HOUR button to set the hour and the MIN button to set the minutes. Keep the buttons depressed for rapid number changing.

If the power is switched off, the clock must be reset.

USE

Lift the cover (1) of the water reservoir (2), and carefully pour in the required quantity of water. Close the cover.

Place a filter (size 1 x 4) in the filter funnel (3), and put coffee or tea in it.

Ensure that the cover for the glass pot (4) is down and then place it on the hotplate

(6) beneath the filter funnel.

Switch on the coffee maker by pressing the large grey on/off button on the bottom right corner of the control panel twice so that the ON indicator light shows red. The coffee maker will start.

You can remove the glass pot during brewing to pour a cup. The automatic drip stop function ensures that coffee does not drip from the filter onto the hotplate. As soon as you replace the glass pot brewing will resume.

Once the coffee is ready, the hotplate under the glass pot will keep the coffee or tea hot.

The coffee maker switches off automatically approximately 2 hours after brewing is complete. You can switch the coffee maker off manually by pressing the on/off button.

USING THE TIMER FUNCTION

The clock must be set (see section “Setting the clock”) to allow you to use the timer function.

Fill the coffee maker with the required amount of water and coffee/tea, as described in the “Use” section. Place the glass pot on the hotplate.

Hold the TIMER button on the control panel in, and set the time the coffee maker is to start by pressing the HOUR and MIN buttons (as described in the section entitled “Setting the clock”).

15

Page 15
Image 15
Melissa 645-075 manual Prior To First Use, Setting The Clock, Using The Timer Function