DESCALING
The lime content of ordinary tap water means limescale may be deposited inside the coffee maker. This limescale may be loosened using acetic acid (NOT ordinary vinegar) or descaler, available in supermarkets, etc.
1.Mix 100 ml acetic acid with 300 ml cold water, or follow the instructions on the descaler packaging.
2.Pour the solution into the water reservoir and switch the coffee maker on using the On/Off button.
3.Allow half of the solution to run through the coffee maker, and then switch it off for approximately 10 minutes.
4.When the 10 minutes are up, switch the coffee maker on again and allow the remainder of the solution to run through it.
5.To remove the final residues of limescale and acetic acid, pour a potful of cold water into the water reservoir, switch the coffee maker on and pass the water through it.
6.Pass fresh water through the machine 3 times (as described in point 5).
7.The coffee maker is now ready for use again.
ENVIRONMENTAL TIPS
Once any electronic product is no longer functional, it should be disposed of in such a way as to cause minimum environmental impact, in accordance with the regulations of your local authority. In most cases you can take such products to your local recycling station.
GUARANTEE TERMS
The guarantee does not apply:
•if the above instructions are not followed
•if the appliance has been interfered with
•if the appliance has been mishandled, subjected to rough treatment, or has suffered any other form of damage
•if faults have arisen as a result of faults in your electricity supply.
Due to the constant development of our products in terms of function and design, we reserve the right to make changes to the product without prior warning.
IMPORTER
Adexi Group
16
